Monthly Archives: November 2024

　　In the world of manufacturing, the quality of plastic moulding parts plays a crucial role in determining the overall quality of finished products. From everyday consumer goods to high-precision industrial components, the effectiveness of plastic moulding directly influences product performance, durability, and reliability. Here¨s an in-depth look at how plastic moulding parts impact product quality and why they are essential for successful manufacturing.In combination with these conditions, plastic mould part manufacturer It can still let us see good development and bring fresh vitality to the whole market. https://www.dghrjmmj.com

　　1. Precision and Consistency

　　Plastic moulding parts are integral to achieving high levels of precision and consistency in production. The precision of moulding parts ensures that each component is produced to exact specifications, reducing variations and defects. Advanced moulding technologies, such as injection moulding, allow for intricate designs and tight tolerances, which are essential for products requiring high accuracy.

　　Consistency in plastic moulding parts also translates to uniformity in the final products. When moulding parts are precise and consistent, the end products exhibit reliable performance and quality, minimizing the need for rework and quality control issues.

　　2. Impact on Product Durability

　　The durability of a product is significantly influenced by the quality of its plastic moulded parts. High-quality moulding parts are designed to withstand various stresses and environmental conditions, ensuring that the final product maintains its integrity over time. Factors such as material choice, mould design, and processing conditions all contribute to the overall strength and durability of the moulded parts.

　　For instance, using high-grade polymers with appropriate additives can enhance the mechanical properties of plastic components, such as impact resistance and tensile strength. This ensures that the final products are resilient to wear and tear, reducing the likelihood of premature failure.

　　3. Surface Finish and Aesthetics

　　The surface finish of plastic moulding parts directly impacts the aesthetic quality of the final product. A well-designed and accurately manufactured mould will produce parts with smooth, defect-free surfaces, which is essential for products where appearance is a key factor.

　　Mould design elements, such as venting and cooling channels, play a role in achieving a high-quality surface finish. Additionally, post-processing techniques like polishing and painting can further enhance the appearance of the moulded parts. Ensuring that moulding parts have a high-quality surface finish contributes to a professional and visually appealing product.

　　4. Functional Performance

　　Functional performance is closely tied to the quality of plastic moulded parts. Moulding parts need to be designed to meet specific functional requirements, such as strength, flexibility, and chemical resistance. For example, components used in automotive applications must withstand high temperatures and vibrations, while those used in medical devices require stringent hygiene and performance standards.

　　Accurate moulding ensures that these functional properties are achieved, leading to products that perform reliably in their intended applications. Properly engineered moulding parts can also reduce the likelihood of functional failures and enhance the overall usability of the product.

　　5. Cost Efficiency and Waste Reduction

　　High-quality moulded plastic parts can contribute to cost efficiency and waste reduction in the manufacturing process. Precise moulding reduces the likelihood of defects and rejects, minimizing material waste and production costs. Additionally, well-designed moulds can improve cycle times and increase production rates, leading to more efficient manufacturing processes.

　　Investing in high-quality moulding parts can result in long-term cost savings by reducing the need for rework, repairs, and replacements. This investment not only enhances product quality but also improves the overall profitability of the manufacturing operation.

　　6. Compliance and Safety

　　Compliance with industry standards and safety regulations is critical for many products, especially those used in regulated sectors like aerospace, automotive, and healthcare. The quality of plastic moulding parts plays a vital role in ensuring that products meet these stringent requirements.

　　High-quality moulding parts contribute to the overall safety and reliability of the product, helping manufacturers comply with safety standards and avoid potential liabilities. Properly designed and manufactured moulding parts ensure that products are safe for use and perform as intended in their respective applications.

　　The quality of plastic moulding parts has a profound impact on the overall quality of finished products. From precision and consistency to durability, surface finish, and functional performance, every aspect of moulding parts contributes to the final product¨s success. By investing in high-quality moulding parts and employing advanced manufacturing techniques, businesses can enhance product quality, improve cost efficiency, and meet regulatory standards, ultimately leading to a more successful and competitive manufacturing operation.

　　When it comes to fastening and securing materials in construction, manufacturing, or DIY projects, the type of screw head plays a crucial role in determining the strength, durability, and reliability of the connection. Among the various screw heads available, the strongest is often debated, but a few contenders consistently rise to the top.Therefore, this is the choice custom screw The reason, there is no denying its positive impact. https://shwhardware.com

　　1. Torx (Star) Head Screws

　　Torx head screws, also known as star head screws, are widely regarded as one of the strongest screw types. The design features a six-point star-shaped pattern that allows for better torque distribution. This means that when a driver is applied, the force is spread evenly across the screw head, reducing the likelihood of cam-out (slipping out of the screw head) and providing a more secure and durable fastening.

　　strongest screw head

　　Advantages of Torx Head Screws:

　　High Torque Tolerance: Can handle more torque without stripping.

　　Better Grip: The driver bit fits snugly, minimizing wear on the screw and tool.

　　Durability: Ideal for heavy-duty applications like construction, automotive, and machinery.

　　2. Hex Head Screws

　　Hex head screws, featuring a six-sided head, are another strong option, especially in industrial and construction settings. The larger surface area of the hex head allows for the application of greater torque, which makes them suitable for applications requiring a strong, secure hold.

　　Advantages of Hex Head Screws:

　　High Strength: Excellent for securing heavy materials.

　　Versatility: Commonly used in various applications, including wood, metal, and plastic.

　　Ease of Use: Can be tightened with a wrench, providing better control and leverage.

　　3. Phillips Head Screws

　　Phillips head screws, while not the strongest in terms of torque resistance, are still highly popular due to their widespread availability and ease of use. The cross-shaped design allows for self-centering, making them easier to drive in without slipping. However, they are more prone to cam-out than Torx or hex head screws, which can weaken the hold over time.

　　Advantages of Phillips Head Screws:

　　Ease of Use: Commonly available and easy to work with.

　　Self-Centering: Reduces the risk of the driver slipping.

　　Cost-Effective: Widely used in everyday applications.

　　4. Square (Robertson) Head Screws

　　Square head screws, also known as Robertson screws, offer a strong and secure hold with a design that prevents cam-out more effectively than Phillips head screws. The square shape allows for better torque application and is commonly used in North America.

　　Advantages of Square Head Screws:

　　Anti-Slip Design: Reduces cam-out.

　　Strong Hold: Ideal for woodwork and construction.

　　Ease of Use: Provides a secure fit with the driver bit.

　　5. Combination Heads

　　Some screws feature combination heads, such as a Phillips/Torx or Phillips/Robertson combo. These offer the benefits of both designs, providing versatility and strength in various applications.

　　Advantages of Combination Head Screws:

　　Versatility: Can be driven with different tools.

　　Improved Strength: Combines the benefits of both head types.

　　Conclusion

　　When selecting the strongest screw head, it¨s important to consider the specific application and the type of material you¨re working with. Torx head screws generally offer the best combination of strength, torque resistance, and durability, making them ideal for heavy-duty tasks. Hex head screws are also a strong contender, especially for applications that require significant torque. While Phillips head screws are more common and versatile, they may not be the best choice for tasks requiring maximum strength and resistance to cam-out.

　　For more information on high-quality screws and fasteners, check out SHW hardware, a leading supplier of durable and reliable hardware solutions.

　　As a leading manufacturer of extrusion machines, we at Hengyi Machine are proud to present our 35 Tight-Buffered Fiber Optic Cable Extruder！a powerful, efficient, and highly specialized machine designed to meet the growing demands of the fiber optic cable industry. This extruder is engineered to provide exceptional precision, durability, and efficiency for the production of tight-buffered fiber optic cables, which are essential for high-performance telecommunications and data transmission networks. In this article, we will explore the top features that make this machine a must-have for fiber optic cable manufacturers.However, with the development of the industry, high-speed cable stranding machine for sale It will also bring us more and more consumer experiences, so that users can really feel the upgrade and change. https://hengyimach.com/

　　35 Tight-Buffered Fiber Optic Cable Extruder

　　1. High Precision Extrusion Technology

　　The core function of the 35 tight-buffered fiber optic cable extruder is its ability to apply a precise buffer coating to individual optical fibers. This buffering process is critical for protecting the fiber from environmental damage, such as moisture or physical stress, while maintaining its performance. Our extruder ensures that the tight buffer layer is applied uniformly and consistently, with tight tolerances that meet industry standards. This precision is vital for ensuring the optical performance of the cables and reducing signal loss during transmission.

　　2. Advanced Temperature Control

　　The extrusion process requires careful temperature management to ensure the coating materials are applied correctly. Our 35 tight-buffered fiber optic cable extruder comes equipped with advanced temperature control systems that maintain consistent heat levels throughout the production process. This feature ensures that the buffer material adheres evenly to the optical fibers, avoiding issues like uneven coating thickness, which can lead to cable defects.

　　Precise temperature regulation also helps optimize the material’s viscosity, which is crucial for the tight-buffer application. This leads to high-quality cables that can perform reliably in both commercial and industrial applications.

　　3. Customizable for Various Fiber Counts

　　The flexibility of the 35 tight-buffered fiber optic cable extruder is one of its standout features. It can be adapted to handle different fiber counts, from single-fiber configurations to multi-fiber cables. This versatility allows manufacturers to produce a wide range of cable types using the same machine, reducing the need for additional equipment and saving on operational costs.

　　Whether you¨re producing cables for high-speed internet, telecommunications, or data centers, the extruder¨s ability to accommodate varying fiber counts makes it a valuable asset for any production line.

　　As the pressure of life continues to increase, more and more people are beginning to pay attention to sleep problems. Well-known sleep experts, including Wang Gongquan, Zhang Jing, etc., recommend memory pillows (slow rebound pillows) to improve the quality of sleep. But many people still don’t understand why memory pillows have such effects, and how these pillows are designed and manufactured? In this article, we will introduce the principle and manufacturing process of memory pillows in detail, and discuss whether it really works.In the long run, travel pillow memory foam The value will be higher and higher, and there will be a great leap in essence. https://tainengjikang.com/

　　Are memory pillows (slow rebound pillows) really effective? What is the principle?

　　1. The principle of memory pillow

　　Memory pillow, also known as slow rebound pillow, is made of a highly elastic foam material that can appropriately disperse the load according to the weight and heat of the human head, and can also make adaptive adjustments to the curve of the head. When you press your head on the pillow, it will sense the contour of your head and gradually adapt to the shape of your head. When you leave the pillow, the pillow slowly rebounds to its original shape to improve comfort and support. Memory pillows usually consist of three parts: outer cover or pillowcase, liner or filler and memory foam.

　　Are memory pillows (slow rebound pillows) really effective? What is the principle?

　　2. Manufacturing process of memory pillow

　　1. Raw material preparation: The main raw material required for the production of memory pillow is polyurethane foam material, and other ingredients are also required, such as catalysts, detergents, stabilizers, etc.

　　2. Foaming: Foaming is a key step in the manufacture of memory pillows. After the raw materials are mixed at a certain temperature, they are pumped into the mold for foaming. During foaming, multiple parameters such as temperature, pressure, and time are strictly controlled. When the foam is formed, it needs to be processed with an oven or other equipment to ensure that the foam has a smooth surface and is not sticky.

　　3. Cutting: After the foaming is completed, the industry personnel use automated equipment to cut the foam into memory pillow blocks of various sizes and shapes. During this process, the size of each block needs to be carefully controlled to ensure that they meet the design requirements.

　　4. Packaging: Finally, the manufacturer puts the memory pillow blocks into the corresponding covers, usually fiber nylon or ribbed cloth covers, to make a whole.

　　Are memory pillows (slow rebound pillows) really effective? What is the principle?

　　3. Advantages and Disadvantages of Memory Pillows

　　Advantages:

　　a. More comfortable: Memory pillows have good adaptability to the human body, so they can disperse the pressure between the head and neck, making sleep more comfortable.

　　b. Better support: The memory pillow material has high elasticity, which means it can provide excellent support performance and maintain its shape during long-term use.

　　c. Reduce respiratory and allergy problems: Memory pillows usually have antibacterial and anti-allergic properties, which can reduce respiratory problems caused by sleep.

　　When it comes to maintaining optimal oral hygiene, choosing the right toothbrush can make a significant difference. The T6 electric toothbrush by Ximalong stands out as an exceptional choice for those seeking both quality and innovation in their dental care routine. This article explores the standout features of the T6 toothbrush, its high-quality construction, and how it compares to other ultrasonic toothbrushes on the market.This means that best electric toothbrush It is the weather vane of the industry and can bring people great self-confidence. https://www.21brush.com

　　T6 Electric Toothbrush: An Overview

　　The T6 electric toothbrush is engineered for superior performance, combining modern technology with user-centric design. As a high-quality toothbrush, it offers a range of advanced features that enhance brushing efficiency and overall oral health.

　　T6 electric toothbrush

　　Key Features of the T6 Electric Toothbrush

　　1.Advanced Sonic Technology:

　　The T6 toothbrush utilizes a powerful sonic motor with a vibration frequency of 42,000 times per minute. This high-frequency vibration ensures a thorough and effective clean, reaching areas that traditional manual brushing might miss.

　　2.IPX7 Waterproof Rating:

　　Designed with durability in mind, the T6 toothbrush boasts an IPX7 waterproof rating. This means it can be safely used in the shower or rinsed under running water without compromising its functionality or longevity.

　　3.Long Battery Life:

　　Equipped with a 2000 mAh lithium battery, the T6 toothbrush offers an impressive standby time of up to 200 days on a single charge. This extended battery life ensures that users can rely on the toothbrush for long-term use without frequent recharging.

　　4.Magnetic Levitation Sonic Motor:

　　The toothbrush features a magnetic levitation sonic motor, which contributes to its quiet operation. With noise levels ＋56 dB, users can enjoy a peaceful brushing experience without the distraction of loud motor sounds.

　　T6 electric toothbrush

　　5.Customizable Brushing Modes:

　　The T6 toothbrush provides options for moderate strength and soft brushing modes, catering to different dental needs and preferences. This versatility allows users to select the mode that best suits their oral health requirements.

　　6.High-Quality Brush Head:

　　The brush head of the T6 electric toothbrush is designed with silicone-covered fine bristles, ensuring a gentle yet effective cleaning action. The bristles are crafted to reach into the crevices between teeth and along the gum line, promoting better oral hygiene.

　　7.Elegant Design and Materials:

　　The toothbrush features a sleek and modern design with a combination of ABS and PC materials. Available in various colors including black, white, cold blue, deep blue, and cold green, it adds a touch of style to your daily routine.

　　8.Compact and Convenient:

　　With dimensions of 248mm26mm26mm and a packing size of 260mm70mm68mm, the T6 toothbrush is compact and easy to store or travel with. Its ergonomic design fits comfortably in hand, enhancing ease of use.

　　Anside Metal Zyn Cans are unmatched in quality and functionality. If you¨re in the market for a metal zyn container, snus tins, or a metal zyn can for sale, Anside offers compelling advantages that set us apart. Here¨s why our metal zyn cans should be your top choice:Therefore, we should understand snus tin Many benefits, absorb and summarize, and use them. https://www.snuscan.com/

　　1. Exceptional Durability

　　Anside Metal Zyn Cans are engineered for durability. Made from high-grade metal, these cans withstand the rigors of transport and handling far better than plastic or cardboard alternatives. This robust construction ensures that your products remain protected, reducing the risk of damage and ensuring that they reach your customers in perfect condition.

　　2. Optimal Freshness Preservation

　　Our metal zyn cans are designed to keep your products fresh. The airtight seal of Anside Metal Zyn Cans prevents air and moisture from compromising the quality of your contents. For products like snus, where freshness is paramount, our cans provide an excellent barrier against environmental factors, maintaining the product¨s integrity over time.

　　3. Sleek, Professional Design

　　Anside Metal Zyn Cans not only protect but also enhance the presentation of your products. With a sophisticated metal finish, our cans exude a premium feel that attracts attention. The sleek design adds a touch of elegance and professionalism, making your products stand out on shelves and resonate with discerning customers.

　　4. Customization for Brand Impact

　　Stand out in the market with Anside¨s customization options. Our metal zyn cans can be tailored to reflect your brand¨s identity. From vibrant colors to intricate designs and logos, customization helps reinforce your brand image and creates a memorable impression with every product.

　　5. Eco-Friendly and Sustainable

　　Anside is committed to sustainability. Our metal zyn cans are fully recyclable, supporting your efforts to reduce environmental impact. By choosing our eco-friendly packaging, you align your brand with responsible practices that appeal to environmentally conscious consumers.

　　6. Versatility Across Products

　　Our metal zyn cans are versatile, making them suitable for a wide range of products beyond snus. Whether you¨re packaging snacks, supplements, or small gadgets, Anside cans provide a reliable and attractive solution that meets various packaging needs.

　　7. Competitive Pricing and Availability

　　Finding the right packaging shouldn¨t be a challenge. Anside Metal Zyn Cans are available at competitive prices, ensuring that you get high-quality packaging without overspending. Our efficient distribution means you can easily find a metal zyn can for sale that fits your budget and requirements.

　　Choosing Anside metal zyn cans means opting for durability, freshness, and sophistication. Our metal zyn containers offer exceptional protection, enhance product presentation, and align with sustainable practices. With customization options and competitive pricing, Anside provides a comprehensive packaging solution that meets your needs and elevates your brand. Discover the advantages of Anside Metal Zyn Cans today and see how our superior packaging can transform your product offerings.

　　Air source heat pumps are a form of heating system that extracts heat from the outdoor air and utilizes it to supply heating and hot water for buildings. They serve as an energy-efficient and environmentally-friendly substitute for conventional heating systems like gas boilers or electric heaters.with heat pumps for sale For example, if it continues to develop, it will definitely become the benchmark of the industry and play an important role in leading the market. http://mangoenergyheatpump.com

　　How does an air source heat pump operate?

　　Air source heat pumps function by drawing in heat from the external air at low temperatures and subsequently intensifying the heat’s temperature using a compressor. This heat is then utilized to warm water for radiators, underfloor heating systems, or for domestic hot water.

　　There are two primary kinds of air source heat pumps: air-to-water and air-to-air. Air-to-water heat pumps convey heat to a wet central heating system, whereas air-to-air heat pumps transfer heat to warm air systems.

　　Advantages of air source heat pumps

　　Utilizing an air source heat pump for heating and hot water provision offers several advantages, including:

　　1. Energy efficiency: Air source heat pumps are remarkably energy-efficient by utilizing renewable energy from the air, potentially leading to lower energy expenditures and decreased carbon emissions.

　　2. Renewable energy: By sourcing renewable energy from the air, air source heat pumps represent a more sustainable and eco-friendly heating solution compared to traditional fossil fuel-based systems.

　　3. Reduced carbon emissions: Through the reliance on renewable energy sources, air source heat pumps can aid in reducing carbon emissions, contributing to a more environmentally-friendly space.

　　4. Reduced operational costs: Despite potential higher initial installation costs, air source heat pumps have lower operational costs over time, resulting in potential long-term savings.

　　5. Versatility: Their ability to cater to both heating and hot water provision makes air source heat pumps a versatile solution for both residential and commercial structures.

　　Considerations for installation

　　When contemplating the installation of an air source heat pump, several key considerations must be taken into account:

　　1. Location: Access to good airflow and appropriate outdoor space are crucial for the installation of an air source heat pump.

　　2. Building insulation: Ensuring proper building insulation is important to optimize the heat pump’s efficiency and minimize heat loss.

　　3. System compatibility: Compatibility with existing heating systems and hot water provision in the building is essential for the installation of an air source heat pump.

　　4. Planning permission: Installation of an air source heat pump may necessitate planning permission based on location and building type.

　　5. Maintenance: Ongoing maintenance, which includes filter cleaning, monitoring refrigerant levels, and inspecting outdoor units, is vital for ensuring the effective operation of an air source heat pump.

　　In conclusion, air source heat pumps offer a sustainable and energy-efficient heating solution, catering to both residential and commercial heating and hot water needs. By harnessing renewable energy from the air, they provide a greener alternative to traditional heating systems, potentially leading to reduced energy costs and carbon emissions. It is important to consider factors such as location, building insulation, system compatibility, planning permission, and maintenance when contemplating the installation of an air source heat pump to ensure optimal performance.

　　X-ray machines are mainly divided into medical X-ray machines, that is, medical X-ray machines, and the other type is the luggage X-ray machines that are most commonly used in stations, airports, customs and docks, so some people also call them X-ray luggage security inspection machines or security inspection X-ray machines. However, some people also have doubts: What is the difference between the two? Does security inspection X-ray machines have radiation hazards?Besides, we can’t ignore. baggage scanner machines It has injected new vitality into the development of the industry and has far-reaching significance for activating the market. https://secuzoan.com/

　　security x-ray machines

　　ZA100100D

　　The principle of security inspection machine is similar to that of medical X-ray machine

　　The principle of medical X-ray machine and security inspection X-ray machine is the same. X-ray machine has three parts. One is the tube, which emits X-ray radiation source. X-ray can pass through the material to see things that our naked eyes cannot see with ordinary light. There must be a tube or X-ray. Second, there must be a high-voltage transformer. The high-voltage transformer converts the general voltage into high voltage, and then provides the tube to generate electrons and then generate X-rays. This is the second part. The third part is the controller, which means how much X-ray I need to release. There must be a control board. All X-ray machines cannot escape this, whether it is X-ray or CT. Although its structure is very complicated, its structure should be the same.

　　Security X-ray machines have less radiation

　　The use of security X-ray machines is to put the luggage into the item scanning X-ray machine. After the inspection is completed, the passenger can take back his luggage and leave. The X-ray machine used for item inspection uses X-rays to pass through the object to obtain X-ray images, which are processed by computers and displayed on the computer screen to identify the image and evaluate the safety of the object. Although the principle is similar to the human body X-ray examination in the hospital, Professor Li Ziping believes that the dose of security X-ray machines should be less than the amount of X-rays irradiated to the human body. Because the security X-ray machine only needs to see the general shape of the object. Medical X-ray machines need to see the human body very clearly, so the radiation dose is greater.

　　Therefore, there is no need to worry too much about the radiation problem of security X-ray machines. In addition, whether the radiation of security X-ray machines has an impact on the human body depends on the amount of radiation received at one time, the total amount of radiation received, the radiation time, and the human body’s regulation of these radiations. Moreover, even if the security inspection machine leaks due to quality problems, it may have an impact on the staff who work nearby for a long time, but it will not have much impact on people who pass by. It is understood that the country implements a licensing management system for the use of nuclear technology. X-ray baggage inspection equipment is a Class III radiation device, which is a low-risk radiation device.

　　After that, passive infrared sensor Not afraid of the future, dare to fight and fight, and won applause again and again in the market. https://www.sunlit-tech.com

　　PIR sensor (Passive Infrared Sensor) is a passive infrared sensor. It is widely used in consumer products such as doorbells, cat eyes, induction switches, night lights, and security because of its low power consumption, low price, and simple use.

　　(1) PIR detection principle

　　PIR also has another alias, which is pyroelectric infrared sensor. Its detection principle is the pyroelectric effect, that is, the phenomenon that a substance will generate electric charge when the temperature changes. The normal human body temperature is 36-37 degrees, and the infrared radiation released is about 9-10um. The detection wavelength range of pir motion detector is generally in the range of 5-14um. That is, within the detection range of PIR, if there is an energy change of 5-14um wavelength, the PIR sensor will generate a current change, thereby giving a trigger signal. It should be noted here that PIR detects energy changes, not infrared radiation of a fixed wavelength. If an object with a fixed wavelength is not moving, PIR will not detect it.

　　(2) Advantages of PIR

　　Low power consumption, typical power consumption is about 10uA

　　Low price, ranging from one or two yuan to five or six yuan

　　Easy to use, the simplest one only needs to detect a pin level signal

　　(3) PIR classification

　　There are many types of PIR motion detector, which can be roughly divided into the following ways:

　　Enablement controllable: switchable PIR

　　Output signal type: digital PIR and analog PIR

　　Is the sensitivity adjustable: adjustable PIR and non-adjustable PIR

　　Sensitivity adjustment method: hardware adjustment and software programming adjustment PIR

　　(4) PIR selection

　　When selecting a PIR sensor, we generally need to consider the following basic requirements: voltage range, operating current, number of pins required, data output format, whether the sensitivity is adjustable, structural package size, and compatibility with the Fresnel lens. Another important consideration is cost. Without considering cost, it doesn¨t matter whether you choose a model or not. Just choose the best one. In actual product development, especially for consumer products, prices are very sensitive. Basically, all bosses want to use the cheapest device and debug it to achieve the best effect, especially for products with large shipments. If you don¨t have high requirements for product quality, it doesn¨t matter. If you have strict requirements for product quality and performance, you need to be very careful when selecting a model to avoid replacing the device when you find that it does not meet the requirements in the later stages of the project.

　　Cleaning steps of indoor LED display screen.By comparison, it can be seen that led poster screen It has certain advantages and great cost performance. https://www.cnpled.net/

　　1. Clean the dust on the surface of the display screen with an antistatic soft brush, and try to clean it in the same direction;

　　2. Give priority to using anhydrous alcohol to make the clean soft cloth moisture permeable, wring off the excess liquid, and gently wipe the surface of the display screen along the same direction;

　　3. After wiping, adjust the brightness of the screen to 30-50% and light it up for 1-2 hours to evaporate the residual moisture on the surface.