Monthly Archives: December 2024

　　This article provides a detailed overview of the key processes and considerations in electroplating, chemical plating, and hot air leveling for Flexible Printed Circuits (FPC). It highlights the importance of pre-treatment in electroplating for maintaining FPC performance, the challenges in controlling plating thickness, and issues related to post-plating stains. Additionally, the article discusses the application of chemical plating when FPC conductors cannot serve as electrodes and the quality concerns that may arise. Finally, it examines the use of hot air leveling on FPCs, focusing on adhesion strength and moisture resistance. Through this article, readers will gain a deeper understanding of the common challenges in FPC manufacturing and their solutions.With the upsurge of industry development, custom flex pcb The expressive force in the market has also been very good, bringing many brand-new high-quality experiences to users. https://gekunflex.com/

　　FPC manufacturer

　　FPC manufacturer

　　FPC Plating Process

　　1. Pre-treatment for FPC Electroplating

　　After the flexible printed circuit (FPC) undergoes the coating process, the exposed copper conductors may be contaminated by adhesives or ink. Additionally, oxidation and discoloration caused by high-temperature processes can occur. To ensure good adhesion of the plating, these contaminants and oxidation layers must be removed, leaving the conductor surface clean.

　　However, some contaminants are strongly bonded to the copper conductor, making it difficult to remove them with weak cleaning agents. Strong alkaline abrasives and brushing are typically used for this treatment. Since the adhesive used in the cover layer is often epoxy-based, which is not resistant to alkaline agents, this can weaken bonding strength. Although not immediately apparent, during the electroplating process, the plating solution may seep into the edges of the cover layer, and in severe cases, cause delamination of the cover layer.

　　At the final soldering stage, solder might seep beneath the cover layer. Therefore, the pre-treatment cleaning process has a significant impact on the basic characteristics of the FPC, making it essential to pay close attention to the processing conditions.

　　2. Thickness of FPC Electroplating

　　The deposition rate of electroplating metal is directly related to the intensity of the electric field, which varies depending on the shape of the circuit and the position of the electrodes. Generally, the thinner the conductor line and the sharper the terminal end, the stronger the electric field, leading to a thicker plating in those areas.

　　In FPC applications, there are often wide differences in the width of conductor lines within the same circuit, resulting in uneven plating thickness. To prevent this, auxiliary cathode patterns are added around the circuit to absorb uneven current distribution across the plating pattern, ensuring uniform plating thickness across all areas.

　　Electrode structure is key here. A compromise approach can be adopted, where stricter standards apply to areas requiring high plating uniformity, such as molten solder (lead-tin) and gold plating for metal wire bonding, while areas requiring plating for general corrosion protection may have more relaxed thickness requirements.

　　FPC manufacturer

　　3. Contamination of FPC Electroplating

　　Immediately after electroplating, the plated surface may appear fine, but stains, dirt, or discoloration can appear over time. Often, these issues are not detected during factory inspections but are discovered during customer acceptance tests. This happens when the plated surface is not adequately rinsed, leaving residual plating solution, which reacts chemically over time, especially on the flexible surface due to its softness and uneven texture.

　　To prevent this, thorough rinsing and drying are essential. A high-temperature thermal aging test can verify whether rinsing was sufficient.

　　FPC Chemical Plating

　　When the conductor to be plated is isolated and cannot serve as an electrode, chemical plating must be used. Chemical plating solutions are highly reactive, and a common example is chemical gold plating. The chemical gold plating solution is an alkaline solution with a very high pH value.

　　When using this process, it is easy for the plating solution to seep beneath the cover layer, especially if the lamination quality control is poor, leading to weak adhesion. Displacement reactions in chemical plating exacerbate this problem, making it difficult to achieve ideal plating conditions.

　　FPC Hot Air Leveling (HASL)

　　Hot air leveling was originally developed for rigid printed circuit boards (PCBs) to coat them with lead-tin. However, this technique has been applied to FPCs due to its simplicity. Hot air leveling involves immersing the board vertically into molten lead-tin and blowing off excess solder with hot air.

　　These conditions are quite harsh for FPCs. Without special measures, FPCs cannot be immersed in molten solder. To address this, FPCs must be clamped between titanium-steel meshes before immersion. Additionally, the surface of the FPC must be cleaned and coated with flux beforehand.

　　Due to the harsh nature of the hot air leveling process, solder may seep beneath the edges of the cover layer, especially if the bonding strength between the cover layer and the copper foil is weak. Since polyimide films are prone to moisture absorption, moisture can evaporate suddenly under the heat, causing blistering or even delamination of the cover layer. Therefore, drying and moisture control must be performed before FPC hot air leveling.

　　FPC manufacturer

　　FPC manufacturer

　　Gekun is a leading manufacturer specializing in high-quality Flexible Printed Circuits (FPC). With years of experience in the industry, Gekun provides advanced FPC solutions tailored to various industries, including telecommunications, medical devices, automotive, and consumer electronics. Their manufacturing process emphasizes precision, reliability, and innovation, ensuring excellent performance and durability. For businesses looking for custom FPC designs or mass production, Gekun stands out as a trusted partner, offering both competitive pricing and cutting-edge technology.

　　For more information on Gekun¨s FPC manufacturing capabilities, you can visit their official website or contact their team for specific inquiries.

　　In the world of home decor, sometimes it¨s the simplest changes that make the biggest difference. Enter the realm of washable sofa covers！an easy and versatile solution to transform your living space. Whether you¨re looking to refresh the look of your home or protect your investment, these covers bring both function and fashion to your furniture.To some extent, sofa cover manufacturer Our development has surpassed many peer businesses, but it has never stopped moving forward. https://www.jopalic.com/

　　In this blog, we¨ll uncover how washable sofa covers can redefine your home¨s aesthetics, examine the impact of textures and patterns, and explore customization options for creating a truly unique piece. Join us as we unveil the magic behind these stylish innovations.

　　How Sofa Covers Can Change the Look and Feel of Your Home

　　It¨s amazing how a simple addition like a wholesale sofa cover can dramatically alter your living space¨s atmosphere. Wholesale sofa covers instantly refresh a room without costly renovations. By swapping out colors and textures, align your furniture with seasonal trends or personal preference, offering a new vibe to your interiors. Imagine stepping into a renewed room where each piece of furniture plays a harmonious role in your home¨s overall aesthetic. With a few strategic choices, wholesale sofa covers provide just that！without breaking the bank. The introduction of washable wholesale sofa covers brings practical benefits. Beyond style, they protect against spills, pet hair, and daily wear, keeping your sofas pristine. Ideal for busy households with children or pets, they maintain a polished look. Their easy maintenance means you can refresh your living space with minimal effort. A quick wash and your wholesale sofa covers are as good as new, making them a smart choice for today¨s fast-paced lifestyle.

　　The Impact of Texture and Pattern on Home Aesthetics

　　The texture and pattern of a custom washable sofa cover can significantly influence your interior space¨s perception. Textures add depth and dimension, inviting a tactile experience that enhances a room¨s visual appeal. A plush, velvety cover can evoke luxury and comfort, while crisp linen might suggest a fresh, airy ambiance. The choice of material can set the tone, making your living room feel cozy or sophisticated, depending on your preference. Patterns, on the other hand, introduce personality and intrigue to your decor. For a sofa cover manufacturer, offering a range of options from classic florals to modern geometrics can enhance a space¨s aesthetics. Patterns can harmonize with existing elements or serve as a bold statement piece, capturing attention and creating focal points. By selecting patterns that resonate with personal style, manufacturers help curate spaces that feel uniquely theirs. Patterns also play with visual proportions, adding interest without overwhelming the senses.

　　Jopalic.com | Spruce Up Your Living Space with Stylish Custom Washable Sofa Covers

　　Customization Options: Designing Your Own Unique Sofa Covers

　　Creating a customized sofa cover allows for the ultimate expression of personal style. With countless fabric options, colors, and patterns available, the possibilities are endless. Whether you prefer a minimalist look or a bold, eclectic style, customizing your cover ensures that it fits perfectly within your vision. This bespoke approach, guided by a skilled sofa cover manufacturer, not only enhances your living space but also reflects your individuality. Customization by a sofa cover manufacturer extends beyond aesthetics to practical considerations. You can choose materials based on specific needs, like hypoallergenic fabrics or those that resist fading in direct sunlight. For homes with pets or young children, selecting a durable and easy-to-clean material is crucial. Custom sofa covers can be tailored to match the functionality required by your lifestyle, offering both beauty and practicality. Working with a sofa cover manufacturer that offers customization allows you to be part of the design process.

　　Transforming your living space doesn¨t always require drastic measures or significant investments. Wholesale sofa covers offer a simple yet effective tool to refresh and protect your furniture. With stylish, washable options, you can enhance aesthetics with the right textures and patterns while customizing a piece that reflects your personal style. Sofa covers provide endless possibilities, proving that small changes can lead to substantial improvements in your home environment. By incorporating these covers, you¨re not only updating your living space but also investing in the longevity and maintenance of your furniture. The combination of style, protection, and convenience makes them an invaluable addition to any home. Consider exploring the variety offered by a reputable sofa cover manufacturer, and discover how flexible and innovative these products can be. For those ready to make a change, now is the perfect time to experiment with new designs and materials.

pass 充值卡 It can be seen from the present situation that the market prospect is relatively broad, which is conducive to our reference and investment. https://www.icash.bet

Around 20:00 local time on the 22nd, a shooting occurred in a concert hall on the outskirts of Moscow, Russia. The latest situation:

Terrorist attacks on concert halls have killed more than 60 people

The number of victims may increase.

A shooting occurred in a concert hall on the outskirts of the Russian capital Moscow on March 22. The Russian Foreign Ministry said on the 22nd that the shooting that took place in the concert hall of Krokus on the outskirts of Moscow that day was a terrorist attack. The investigation Commission of the Russian Federation said it would conduct a criminal investigation into the shooting in the concert hall in accordance with the provisions of terrorist acts.

The investigation Commission of the Russian Federation says more than 60 people have been killed in the attack. The number of victims is likely to increase.

According to Russian local media reports, law enforcement officials are searching for a white car that may have been used by the perpetrators of the concert hall shooting. It is reported that after the attack, four of them ran out of the concert hall, changed into prepared clothes and fled the scene.

Putin gives instructions

According to RIA Novosti news agency reported on the 22nd local time, Russian President Vladimir Peskov said that Russian President Vladimir Putin has made all necessary instructions on the attack on the concert hall on the outskirts of Moscow.

Peskov also said that within minutes of the incident, Putin knew about the terrorist attack and continued to keep abreast of the latest information.

The smoke once affected the rescue.

All-round enhancement of urban vigilance

At 3: 00 a.m. local time on the 23rd, Wang Bin, a reporter from the Central Radio and Television General Station, saw in the parking lot of the concert hall where the shooting occurred in Moscow, Russia, that rescue vehicles at the scene had been reduced, and the possibility of a further rise in the death toll could not be ruled out.

, the length is 01:52.

Earlier, members of the Russian National Guard were unable to stay for a long time during the search and rescue process in the concert hall due to the influence of thick smoke.

After the terrorist attacks, the Russian Ministry of Transport announced that security checks at airports and railway stations will be strengthened to remind passengers going to airports or railway stations to travel ahead of time. Russia’s Vnukovo airport, which is relatively close to the site of the incident, announced that it had stepped up security. The Ministry of Culture of the Russian Federation announced that all public and recreational activities of federal cultural institutions have been cancelled in the next few days. Moscow Mayor Sobyanin announced the evening of 22 local time, cancel all cultural, sports and other public activities held in Moscow over the weekend.

Survivors tell stories of thrilling moments

Some survivors of the attack told the media about the scary moments of the attack.

Several heavily armed attackers shot at the crowd and set fire to the building where the concert hall is located. According to RIA Novosti, the roof of the building collapsed. Earlier, trapped people were waiting for rescue on the roof. Russian rescue workers evacuated about 100 people from the basement of the burning building.

Russian Foreign Ministry spokesman Zakharovaa said the international community must condemn this inhuman crime. Zakharovaa also said that if the United States has and currently has reliable information about the attack, it should be handed over to Russia immediately. The US Embassy in Russia issued a notice on it on the 7th of this month that Russia will face a terrorist threat within the next 48 hours, and that extremists plan to attack large crowd gathering places in Moscow, including concert halls.

The Security Council issued a statement

Strongly condemns the terrorist attack on the Russian concert hall

On March 22, local time, the United Nations Security Council issued a statement strongly condemning the terrorist attack at a concert hall on the outskirts of Moscow, Russia.

The statement said it was a heinous cowardly terrorist attack. Members of the Council expressed their deepest sympathy and condolences to the families of the victims and the Russian people and wished the injured a full recovery as soon as possible.

Members of the Council reaffirmed that terrorism in all its forms and manifestations is one of the most serious threats to international peace and security.

The statement stressed that the perpetrators, organizers, financiers and supporters of these reprehensible terrorist acts should be held accountable and brought to justice. All States are urged to cooperate actively with the Government of the Russian Federation and all other relevant authorities in this regard in accordance with their obligations under international law and relevant Security Council resolutions.

The Council reiterates that any terrorist act is a crime and cannot be excused, regardless of its motive, when, where and by whom it was committed. All States must adopt all means to combat the threat to international peace and security posed by terrorist acts in accordance with their obligations under the Charter of the United Nations and international law.

If we can practice these points, dandadan Will be unique, become a leader in the industry, and keep moving forward. https://dandadan.top/

Abidjan, July 14 (Reporter Zhang Jian) News from Niamey: Niger’s Defense and Security Forces issued a communiqué on the evening of the 13th, saying that most of the dozens of prisoners who recently escaped from the country’s Kutukare prison have been captured and three others were killed.

The communiqué said the area where the prison is located has been cordoned off and an aerial search operation is still underway to find the remaining fugitives. The military called on the public to be vigilant and immediately report any suspicious person or any relevant information to the authorities.

On the evening of the 11th, a prisoner escape occurred at Kutukare Prison in Tirabei Province, Tirabei Region, western Niger. The prison is located 50 kilometers northwest of Niamey, the capital of Niger, and holds members of extremist organizations such as the Boko Haram Islamic State. In 2016 and 2019, two jailbreaks occurred in this prison, both of which were successfully prevented.

among Extrusion line It has given great spiritual support to entrepreneurs, and more entrepreneurs will contribute to this industry in the future. https://www.machinecx.cn/

According to a report by the TASS news agency on March 18, the final data released by the Central Election Commission of the Russian Federation showed that all votes had been counted, and the vote rate of current President Vladimir Putin was 8728%.

According to reports, Russian Communist Party candidate Nikolai Haritonov ranked second with 431% of the vote, and New Party candidate Vladislav Davankov ranked third with 385% of the vote, ranking fourth. The Liberal Democratic Party candidate Leonid Slutsky, who received 320% of the vote.

Elapamfilova, Chairman of the Central Election Commission of the Russian Federation, said that the voter turnout rate in the Russian presidential election was unprecedented.

She said at the Central Election Commission meeting held on the 18th: As of 10:00 on the 18th, 87113127 voters participated in this election. The turnout rate hit an unprecedented record, reaching 7744%.

She pointed out that more than 76 million people voted for Putin, which also set a record. In 2018, about 56 million Russians voted for Putin.

The report mentioned that Pamfilova also said that since the beginning of the presidential election campaign, more than 12 million cyber attacks have been recorded, 150 times the usual number. (Compiled by Li Ran)

　　1. Introduction to Multilayer Flexible Printed Circuit Boards (FPC)precisely because flexible circuits The rapid development of, so also brought new opportunities to the industry. https://gekunflex.com/

　　Multilayer flexible printed circuit boards (FPCs) are at the forefront of modern electronic design, providing both flexibility and durability in high-performance environments. These circuits are made up of multiple layers of flexible material, usually polyimide, which allows them to bend and fold while maintaining their electrical performance. As devices become more compact and complex, especially in automotive, aerospace, and medical applications, the demand for multilayer FPCs continues to rise.

　　In this article, we¨ll explore the manufacturing process of multilayer flexible printed circuit boards, highlighting their importance in key industries. We¨ll also emphasize the value of these boards in the European and American markets and how Gekun, a leader in FPC production, offers cutting-edge solutions.

　　Multilayer Flexible Printed Circuit Boards

　　Multilayer Flexible Printed Circuit Boards

　　2. Key Steps in the Manufacturing Process

　　Material Selection and Layer Construction

　　The manufacturing of multilayer flexible printed circuit boards begins with selecting the appropriate materials. Polyimide is the standard base material due to its high-temperature resistance and flexibility. Copper layers are added to create conductive pathways, and the number of layers depends on the complexity of the design.

　　Each layer is carefully constructed, starting with the outer flexible layer, followed by insulating and conductive layers in a sequence. The layers are aligned meticulously to ensure connectivity across all components.

　　Imaging and Etching Process

　　Once the layers are in place, the next step is to image and etch the copper to define the circuit paths. Photolithography techniques are used to project circuit designs onto the copper layer, which is then etched to remove unwanted areas. This step is critical to creating precise electrical pathways.

　　Layer Alignment and Lamination

　　After each layer is imaged and etched, the different layers are stacked and aligned using precision machinery. Any misalignment can cause failure in the final product, especially as the complexity of the multilayer flexible printed circuit board increases. The layers are then laminated using heat and pressure to form a single, unified structure.

　　Drilling and Plating

　　Once laminated, the board is drilled to create vias (small holes) that connect the different layers electrically. These vias are plated with copper to ensure proper conductivity between layers. The drilling and plating processes must be executed with high precision, as any defects can lead to failures in the finished product.

　　Testing and Quality Control

　　The final steps in the multilayer FPC manufacturing process involve rigorous testing to ensure electrical performance and durability. Automated optical inspection (AOI) systems are often used to detect defects, while electrical testing verifies the connectivity of all circuits. The quality control process ensures that the FPCs meet the high standards required for industries such as automotive, aerospace, and medical devices.

　　3. Benefits of Multilayer FPCs in Different Industries

　　Consumer Electronics and Automotive Applications

　　The flexibility and lightweight nature of multilayer flexible printed circuit boards make them ideal for consumer electronics, such as smartphones and wearable devices. They allow manufacturers to create compact designs while maintaining excellent electrical performance. In the automotive industry, FPCs are used in advanced driver-assistance systems (ADAS) and infotainment systems, providing both durability and flexibility in harsh environments.

　　Aerospace and Medical Device Markets

　　In aerospace, where weight reduction and reliability are critical, multilayer FPCs offer a solution that meets stringent industry standards. Their ability to function under extreme conditions makes them valuable in aircraft avionics. Similarly, in the medical device sector, FPCs are widely used in diagnostic equipment and implantable devices, where their flexibility and high reliability are essential.

　　Multilayer Flexible Printed Circuit Boards

　　Multilayer Flexible Printed Circuit Boards

　　4. Challenges in Manufacturing Multilayer FPCs

　　Complex Design Requirements

　　The design of multilayer flexible printed circuit boards presents significant challenges due to the need for precise alignment and electrical performance across multiple layers. Each layer must be carefully planned to ensure that the circuits are properly routed, and the design must accommodate the mechanical stresses that occur during bending and folding.

　　Reliability and Durability Concerns

　　In applications such as automotive and aerospace, FPCs are exposed to harsh conditions, including extreme temperatures and vibrations. Ensuring that the boards maintain their performance under these conditions requires advanced materials and manufacturing processes, which can increase production costs.

　　5. The Role of Gekun in Multilayer FPC Manufacturing

　　Gekun is a leader in the multilayer flexible printed circuit board market, providing high-quality solutions tailored to the needs of modern industries. With cutting-edge manufacturing facilities and a focus on innovation, Gekun offers FPCs that meet the most stringent industry standards. Their expertise in multilayer FPC manufacturing ensures that customers receive reliable, high-performance products suited for automotive, aerospace, and consumer electronics markets.

　　Gekun¨s commitment to quality and precision makes them a trusted partner for businesses looking to innovate and stay ahead in the competitive market.

　　Multilayer Flexible Printed Circuit Boards

　　Multilayer Flexible Printed Circuit Boards

　　6. Conclusion

　　The multilayer flexible printed circuit board manufacturing process is a complex yet crucial aspect of modern electronics. These boards provide the flexibility and durability needed for advanced technologies in automotive, aerospace, and medical industries. By understanding the manufacturing steps, benefits, and challenges associated with multilayer FPCs, businesses can better appreciate their value in the global market.

　　Gekun, as a trusted manufacturer, continues to lead the industry with innovative solutions that meet the demands of today¨s fast-paced technology landscape.

　　First, the importance of quality control of imported sofa coversfrom sofa cover manufacturer Looking at the development prospects, the future will always bring positive effects. https://www.jopalic.com/

　　Meet customer needs

　　High quality sofa covers can meet the customer¨s needs for beauty, comfort and durability. Customers in the choice of sofa cover, often pay attention to its material, color, pattern, feel and other aspects, but also hope that the sofa cover can have good waterproof, anti-fouling, wear and other properties. Only through strict quality control can we ensure that imported sofa covers meet customer expectations and improve customer satisfaction.

　　Enhance the competitiveness of enterprises

　　In the fierce market competition, product quality is the foundation of the enterprise. As a professional manufacturer of sofa covers, through the quality control of imported sofa covers, we can improve the quality and added value of products and enhance the core competitiveness of enterprises. High-quality sofa covers can not only attract more customers, but also bring higher profits and market share for enterprises.

　　Ensure smooth production

　　As a raw material, the quality of imported sofa covers directly affects the subsequent production and processing process. If there are quality problems with imported sofa covers, such as size inconsistency, color deviation, poor material, etc., it will lead to production interruption, cost increase, delivery delay and other problems. Therefore, strict control of the quality of imported sofa covers can ensure the smooth progress of production and improve production efficiency.

　　Jopalic.com | Quality control points of imported sofa covers

　　Import sofa cover quality control points

　　Supplier selection

　　(1) Qualification review

　　When choosing an imported sofa cover supplier, it is first necessary to conduct a qualification review. Understand the supplier¨s enterprise size, production capacity, quality management system, reputation and other aspects. Choosing suppliers with good qualifications and reputation can reduce quality risks and ensure the stable quality of imported sofa covers.

　　(2) Field visits

　　Site visits to suppliers are possible if conditions permit. Inspect the supplier¨s production workshop, equipment and facilities, raw material procurement channels, quality control process, etc. Through the field investigation, we can more intuitively understand the production strength and quality control level of the supplier, and provide a basis for choosing the right supplier.

　　(3) Sample evaluation

　　Ask suppliers to provide samples for evaluation before identifying suppliers. The material, color, pattern, feel and size of the sample are tested, and its waterproof, antifouling and wear-resistant properties are tested. Through sample evaluation, we can preliminarily judge whether the quality of the supplier¨s products meets the requirements.

　　Contract signing

　　(1) Clarify quality standards

　　Before signing a contract with the supplier for the import of sofa covers, it is necessary to clarify the quality standards. Quality standards should include material requirements, color deviation range, dimensional tolerance, performance indicators and other aspects of the content. Clear quality standards can provide a basis for quality control and avoid disputes caused by unclear quality standards.

　　(2) Agree on the inspection method

　　The method of inspection shall be stipulated in the contract, including the proportion of sampling inspection, inspection method and inspection institution. The inspection method should be scientific and reasonable, and can effectively detect the quality problems of imported sofa covers. At the same time, the inspection institution should be authoritative and impartial to ensure the accuracy of the inspection results.

　　(3) Determine the liability for breach of contract

　　In order to ensure that suppliers can provide products in strict accordance with quality standards, the contract should specify the liability for breach of contract. If the quality of the products provided by the supplier does not meet the requirements, it shall bear the corresponding liability for compensation. The determination of liability for breach of contract can restrain suppliers and improve their quality awareness.

According to professional reports, dandadan There will be a great period of growth, and the market business is constantly expanding, and it will definitely become bigger and bigger in the future. https://dandadan.top/

According to a report by Russia’s “Labor” on March 20, Alexei Goncharenko, a member of the Verkhovna Rada (Parliament) of Ukraine, said on the 20th that the French government is considering sending troops to the Ukraine border to help the Ukrainian army liberate its troops.

The report said that the Ukraine lawmaker said he learned the news from his French counterpart at the Parliamentary Assembly of the Council of Europe.

He emphasized that discussions on France sending troops to Ukraine are indeed ongoing.

Gonchalenko also said that the number of this force is not yet certain. However, French President Macron is very firm.

Goncharenko said France was forming an alliance and Poland and the Baltic states might join. Another option is to establish a base in western Ukraine, where Ukrainian soldiers can be trained and artillery shells produced.

The report mentioned that the French Ministry of Defense issued a statement a day ago saying that Russian Foreign Intelligence Agency Director Naryshkin’s statement that the French leadership was preparing to send 2000 soldiers to Ukraine was spreading rumors. At the same time, the news that there were French soldiers in Ukraine was also false. Russian Foreign Ministry spokesperson Zakharova immediately responded to the Paris statement. She wrote on the Telegraph social platform: Has the French government abandoned its citizens again?(Compiled by He Yingjun)

Related news recommendations:

Medvedev: Eliminating French forces in Ukraine is not difficult

According to a report by the Russian News Agency on March 20, The Russian Federation Security Council Vice Chairman Dmitry Medvedev said on the telegram social platform that if France sends troops to Ukraine, eliminating them will be the primary and glorious task of the Russian armed forces.

According to reports, Medvedev believes that it is difficult for the French army to hide its traces in Ukraine, so it is not difficult to eliminate them, and it is impossible to conceal the large number of deaths of French professional soldiers.

Medvedev wrote on the Telegraph social platform: These unfortunate people will become official combatants of the (foreign) intervention force. Eliminating them will be the primary and glorious task of our armed forces.

Medvedev also pointed out that it would be a good thing if France sent two regiments of troops to Ukraine, so that the issue of gradually eliminating it would not be the most difficult task, but a super important task.

Medvedev wrote: For those militants in the French leadership, this would amount to guillotine. Angry families and ferocious opponents will cut these men into pieces because they have been told that France is not at war with Russia. This will be a good lesson for other restless European fools.

Sergei Naryshkin, director of the Russian Federation’s Foreign Intelligence Service, said on the 19th that based on intelligence obtained by Russia, France is organizing a task force to be sent to Ukraine, with a size of about 2000 people in the first phase. (Compiled by Liu Yang)

for a long time Extrusion line It has an extraordinary development speed, and I believe that the future will be as overwhelming as ever. https://www.machinecx.cn/

Jerusalem, March 21 (Reporters Wang Zhuolun and Lu Yingxu) The Israeli military issued a situation report on the 21st, saying that the Israeli army had killed about 140 Palestinian militants during its military operation at Shifa Hospital in Gaza City, and more than 600 suspects were taken back to Israel for investigation.

The report said that the Israeli army found weapons and intelligence documents of Palestinian armed groups at Al-Shifa Hospital. Israeli troops will continue operations in the Shifa Hospital area.

Israeli media quoted military officials as saying the military operation at Shifa hospital was expected to last for several days.

On the 18th, Israeli troops stormed into Shifa Hospital and issued a statement saying that intelligence showed that Palestinian Islamic Resistance Movement (Hamas) militants had recently entered Shifa Hospital and used the hospital as a command center.

The Israeli army took military action against Shifa Hospital in November last year and claimed that Hamas ‘combat command center and military equipment were found in the hospital. The Gaza Strip health department denied this.

for a long time icash.one点卡 It has an extraordinary development speed, and I believe that the future will be as overwhelming as ever. https://www.icash.bet

Rio de Janeiro, March 12 (Reporter Zhao Yan) The Brazilian Federal Senate announced at a plenary session on the 12th the establishment of a parliamentary investigation committee to investigate cases of fixing football match results, hoping to severely punish match-fixing.

This committee consists of 11 members, appointed by representatives from all parties in Parliament. According to a report by Brazil’s “Sao Paulo” on March 4, of the approximately 9000 Brazilian football matches monitored by sports betting radar in 2023, 109 (approximately 121% of the total) were suspected of playing match-fixing, ranking first in the world.

On the 11th of this month, the Prosecutor’s Office of the Federal District of Brasilia issued a search and arrest warrant against two Santa Maria players, accusing them of directly participating in match-fixing in two games in the state league. Evidence collected by the investigation showed that the two men used methods including deliberately being awarded penalty kicks, deliberately marking errors, and even making an own goal to make the team lose the game.

In December last year, the Brazilian Congress passed the online sports betting bill, which officially came into effect after being approved by President Lula. At the end of January this year, the federal government established a Bonuses and Gaming Secretariat, which is responsible for regulating and supervising the sports betting and online gambling industries.