Yearly Archives: 2024

　　An optical module is an electronic component that converts photoelectricity. Simply put, optical signals are converted into electrical signals, and electrical signals are converted into optical signals. It includes transmitting devices, receiving devices, and electronic functional circuits. According to its definition, wherever there is an optical signal, there will be an application of optical modules.Without exception, 800g qsfp-dd Our customers are willing to purchase their products, because high quality is the concept of their products. https://www.3coptics.com/

　　optical modules

　　So what are the application devices and scopes of optical modules? Today we will show you in pictures and texts.

　　1. Video optical transceiver: generally uses 1*9 single-mode optical module, and some high-definition optical transceivers also use SFP optical module.

　　optical modules

　　2. Fiber optic transceiver: using 1*9 and SFP optical modules

　　3. Switch: The switch will use GBIC, 1*9, SFP, SFP+, XFP optical modules, etc.

　　4. Fiber optic router: generally using SFP optical modules

　　5. Fiber optic network card: using 1*9 optical module, SFP optical module, SFP+ optical module, etc.

　　6. Fiber optic high-speed ball camera: using SFP optical module

　　7. Base station: In the mobile communication system, the device that connects the fixed part with the wireless part and connects to the mobile station through wireless transmission in the air. Using SFP, XFP optical modules

　　8. Tunnel traffic monitoring

　　optical modules

　　Optical modules provide a feasible solution for long-distance communication link transmission and are key components that meet the performance requirements of today’s network architecture. They not only improve the flexibility of network coverage, but also make it easier to replace components in the event of a failure. 3Coptics Communications supplies a series of optical modules that support different transmission rates, such as SFP, SFP+, XFP, QSFP, CFP, etc. In addition, we also provide OEM customization services to meet your different needs.

　　For thrill-seekers and outdoor enthusiasts, capturing every heart-pounding moment is essential. The hawkeye firefly sports camera, renowned for its long battery life, is the ultimate companion for documenting your adventures. This blog post delves into the features and benefits of Hawkeye Firefly sports cameras, emphasizing their exceptional battery performance that ensures you never miss a moment.As can be seen from the new data, hawkeye firefly q6 action camera The market influence is also growing, and the product share is also relatively increasing, which has great potential in the future. https://hawkeyecameras.com/

　　Why Choose a Sports Camera with Long Battery Life?

　　Battery life is a critical factor when selecting a sports camera for several reasons:

　　Extended Recording Time: Long battery life allows for continuous recording, ensuring you capture every significant event without frequent interruptions.

　　Reliability in Remote Locations: For adventures in remote areas, a camera with extended battery life provides peace of mind, knowing your camera won¨t run out of power at a crucial moment.

　　Convenience: Fewer battery changes mean you can focus more on your activities and less on managing your camera¨s power supply.

　　Experience Endless Adventures with Hawkeye Firefly: Sports Camera with Long Battery Life(夕1)

　　Hawkeye Firefly Sports Cameras: Features and Benefits

　　1. Superior Battery Performance

　　The Hawkeye Firefly sports camera boasts a high-capacity battery, providing extended recording time, which is ideal for long hikes, mountain biking, and other outdoor activities.

　　2. Efficient Power Management

　　Advanced power management systems optimize battery usage, ensuring the camera operates efficiently for prolonged periods.

　　3. Versatility

　　Whether you¨re diving underwater, skiing down a slope, or exploring rugged terrains, the Hawkeye Firefly sports camera is designed to withstand extreme conditions while delivering outstanding performance.

　　4. High-Quality Footage

　　Capture stunning 4K video and high-resolution images with the Hawkeye Firefly sports camera, ensuring every detail of your adventure is documented in exceptional quality.

　　Experience Endless Adventures with Hawkeye Firefly: Sports Camera with Long Battery Life(夕2)

　　Top Models of Hawkeye Firefly Sports Cameras

　　Hawkeye Firefly 8SE

　　Battery Life: Up to 2 hours of continuous recording in 4K.

　　Key Features: 1200mAh battery, gyro stabilization, waterproof up to 20 meters with a housing, and 4K video recording.

　　Hawkeye Firefly 6S

　　Battery Life: Approximately 90 minutes of recording in 4K.

　　Key Features: 1600mAh battery, Wi-Fi connectivity, wide-angle lens, and 4K video recording.

　　Hawkeye Firefly 8S

　　Battery Life: Around 100 minutes of recording in 4K.

　　Key Features: 1200mAh battery, dual-screen display, EIS stabilization, and 4K video recording.

　　Tips for Maximizing Battery Life

　　Turn Off Unnecessary Features: Disable Wi-Fi, GPS, and other features when not in use to conserve power.

　　Lower Screen Brightness: Reducing the brightness of the camera screen can significantly save battery life.

　　Use Power-Saving Modes: Utilize any power-saving modes offered by the camera to extend recording time.

　　Carry Spare Batteries: Always have fully charged spare batteries to ensure you never miss capturing a moment.

　　Conclusion

　　The Hawkeye Firefly sports camera, with its long battery life and robust features, is the perfect tool for adventurers who demand reliability and performance. By choosing a sports camera with extended battery life, you can document your experiences without interruption, ensuring you capture every thrilling moment. Explore the range of Hawkeye Firefly sports cameras and take your adventures to the next level.

　　In today’s fast-paced technological landscape, the demand for reliable, durable, and efficient user interfaces is higher than ever. Membrane switches, known for their versatility and compact design, play a crucial role in a wide range of applications, from consumer electronics to industrial machinery. When it comes to sourcing high-quality membrane switches, Singway stands out as a leader in the industry. Here’s why Singway should be your go-to manufacturer for membrane switches.in fact membrane switch It is more and more welcomed by our customers, and its market performance is gradually improving. https://singway-touch.com/

　　singway membrane switches

　　1. Unmatched Quality and Reliability

　　At Singway, quality is paramount. Each membrane switch undergoes rigorous testing and quality control to ensure it meets the highest standards of performance and durability. Singway’s commitment to quality means that every switch is built to last, providing reliable operation even in the most demanding environments. This reliability ensures that your products maintain their functionality and performance over time, reducing the need for frequent replacements and repairs.

　　2. Advanced Manufacturing Techniques

　　Singway employs advanced manufacturing techniques and state-of-the-art equipment to produce membrane switches that are both precise and consistent. By leveraging the latest technology, Singway can achieve intricate designs and complex configurations, ensuring that each switch meets the specific requirements of your application. This precision manufacturing results in high-performance switches with excellent tactile feedback and responsiveness.

　　3. Customization and Flexibility

　　One of Singway’s key strengths is its ability to offer customized solutions tailored to your unique needs. Whether you require specific dimensions, unique graphics, or specialized functionalities, Singway can design and manufacture membrane switches that align perfectly with your specifications. This flexibility allows you to create products that stand out in the market and meet the exact demands of your customers.

　　4. Wide Range of Applications

　　Singway’s membrane switches are designed to cater to a diverse range of applications, including medical devices, automotive controls, consumer electronics, and industrial equipment. This versatility ensures that no matter your industry, Singway has the expertise and capability to provide the ideal membrane switch solution. Their extensive experience across various sectors guarantees that you receive switches that are perfectly suited to your application¨s specific requirements.

　　5. Excellent Customer Support

　　Singway prides itself on providing exceptional customer support throughout the entire manufacturing process. From initial consultation and design to production and delivery, Singway’s team of experts is dedicated to ensuring that your experience is seamless and satisfactory. Their proactive approach to customer service means that any issues or concerns are addressed promptly, ensuring that your project stays on track and within budget.

　　6. Cost-Effective Solutions

　　Despite offering top-notch quality and advanced features, Singway remains committed to providing cost-effective solutions. Their efficient manufacturing processes and economies of scale enable them to offer competitive pricing without compromising on quality. This affordability makes Singway an attractive partner for businesses looking to balance high performance with budget considerations.

　　7. Sustainable and Eco-Friendly Practices

　　Singway is dedicated to sustainable manufacturing practices and minimizing its environmental impact. They use eco-friendly materials and processes to produce membrane switches, ensuring that their products are safe for both users and the environment. By choosing Singway, you not only get high-quality switches but also contribute to a more sustainable future.

　　8. Innovative Design Capabilities

　　Innovation is at the heart of Singway’s approach to manufacturing. Their team of skilled designers and engineers continually explores new materials, technologies, and design methodologies to create membrane switches that push the boundaries of performance and aesthetics. This commitment to innovation ensures that you receive cutting-edge products that keep your offerings ahead of the competition.

　　9. Global Reach and Timely Delivery

　　With a robust global supply chain and efficient logistics, Singway ensures timely delivery of your membrane switches, no matter where you are located. Their ability to meet tight deadlines and deliver products on time is crucial for businesses that operate in fast-paced markets and rely on timely product launches and updates.

　　The varieties of medals and badges are generally determined by their different production processes. The most common production processes for medals and badges include enamel, paint, imitation enamel, stamping, screen printing, die-casting, etc. Today, we will introduce different production processes and their characteristics.With the upsurge of industry development, custom medals for awards The expressive force in the market has also been very good, bringing many brand-new high-quality experiences to users. https://www.karonmetal.com

　　1. Production process – enamel

　　As the most advanced coloring process, enamel is said to have been first recorded in the Yuan Dynasty, was most refined in the Ming Dynasty, and was already flourishing in the Qing Dynasty. Enamel badges, also known as cloisonn└ badges, are colored with enamel powder on red copper (purple copper). The color is dark and single, the cost is high, and it is fragile and cannot be knocked or faded by gravity. However, because of its strong color fixation and long preservation time, it is generally chosen to make commemorative medals that need to be preserved for a long time without fading, badges, medals, medals, etc. for state organs, military police, etc.

　　2. Production process – imitation enamel

　　Imitation enamel badges are generally colored with resin paint. The color is brighter than enamel and can be made of copper, zinc, alloy, etc. as the base material, with a strong sense of concave and convex. Soft enamel badges and resin are coloring materials developed by foreign experts. The surface can be plated with various metal colors such as gold and nickel. It is smooth and delicate, giving people a very noble feeling. It is suitable for high-end badge customization, mid-to-high-end commemorative medal production, commemorative medals and other exquisite products.

　　How to distinguish enamel from imitation enamel: Real enamel has a ceramic texture, less color selection, and a hard surface. Puncture the surface with a needle will not leave marks, but it is easy to break. Imitation enamel is soft, and a needle can pierce the fake enamel layer. The color is bright, but it cannot be preserved for a long time. After three to five years, the color will turn yellow after high temperature or ultraviolet radiation.

　　As the world grapples with the escalating plastic pollution crisis, innovative packaging solutions are crucial for mitigating environmental impact. Among these solutions, biodegradable zipper bags, including compostable zipper bags and biodegradable ziplock bags, stand out as promising alternatives to conventional plastic bags. This article explores how these eco-friendly options contribute to reducing plastic pollution and their benefits for both the environment and consumers.In the long run, recycle trash bags The value will be higher and higher, and there will be a great leap in essence. https://biodegradable-gd.com

　　1. The Environmental Challenge of Traditional Plastic Bags

　　Traditional plastic bags are a significant contributor to environmental pollution. Made from polyethylene, they are durable and resistant to degradation, which, while advantageous for their intended use, means they persist in the environment for hundreds of years. These bags often end up in landfills, where they can take centuries to break down, releasing harmful chemicals into the soil and waterways. Additionally, they frequently contribute to marine pollution, harming wildlife that ingest or become entangled in plastic debris.

　　biodegradable ziplock bag.jpg

　　2. Biodegradable Zipper Bags: A Sustainable Alternative

　　Biodegradable zipper bags are designed to address the issues associated with conventional plastic bags. Unlike traditional plastics, these bags are engineered to decompose more rapidly under certain conditions. They are made from materials that break down into natural components, such as cornstarch or other plant-based substances, which can be processed by microorganisms in composting environments.

　　Key Features of Biodegradable Zipper Bags:

　　Material Composition: Biodegradable zipper bags are typically made from polymers derived from renewable resources like cornstarch or sugarcane. These materials are designed to degrade more quickly than conventional plastics, reducing the long-term environmental impact.

　　Decomposition Process: When exposed to the right conditions！such as moisture, heat, and microbial activity！biodegradable zip lock bags and compostable zipper bags begin to break down into organic matter. This process occurs much faster than the degradation of traditional plastics, minimizing their persistence in landfills and natural environments.

　　3. Benefits of Biodegradable Zipper Bags

　　Reduced Plastic Waste: By replacing conventional plastic bags with biodegradable alternatives, the volume of non-degradable plastic waste is significantly reduced. This shift helps decrease the amount of plastic that ends up in landfills and oceans, thereby mitigating the harmful effects of plastic pollution.

　　Lower Environmental Impact: Biodegradable zipper bags decompose into non-toxic substances, unlike traditional plastics that can release harmful chemicals as they break down. This reduces the risk of soil and water contamination and helps maintain ecosystem health.

　　Enhanced Composting: Compostable zipper bags can be processed in industrial composting facilities where they break down into nutrient-rich compost. This compost can then be used to enrich soil, supporting agricultural practices and closing the loop on waste.

　　4. Practical Considerations

　　While biodegradable zipper bags offer significant environmental advantages, there are practical considerations to keep in mind:

　　Composting Facilities: Biodegradable and compostable bags require specific conditions to decompose properly. Industrial composting facilities provide the ideal environment for these bags to break down effectively. In areas lacking such facilities, the environmental benefits may be reduced.

　　Consumer Awareness: For biodegradable zipper bags to have a meaningful impact, consumers need to be aware of proper disposal methods. Education on the correct disposal of these bags！whether through composting programs or specific waste management systems！is essential for maximizing their benefits.

　　Cost and Availability: Biodegradable and compostable bags can be more expensive than traditional plastic bags, which may be a consideration for both consumers and businesses. However, the long-term environmental benefits often outweigh the initial cost.

　　5. Future Outlook

　　The use of biodegradable zipper bags represents a positive step toward reducing plastic pollution. As technology advances and production processes become more efficient, these bags are likely to become more affordable and widely available. Continued innovation and increased consumer adoption will play crucial roles in mitigating plastic pollution and promoting sustainable packaging solutions.

　　Biodegradable zipper bags, including compostable zipper bags and biodegradable ziplock bags, offer a promising solution to the plastic pollution crisis. By breaking down more rapidly and reducing the long-term environmental impact of plastic waste, these bags contribute to cleaner ecosystems and a more sustainable future. As the market for eco-friendly packaging solutions expands, the adoption of biodegradable options will play a critical role in addressing one of the most pressing environmental challenges of our time.

　　Friends, do you always have a headache when thinking about international transshipment, worrying about the high tariffs and the complicated customs clearance process?Don¨t worry!!! FLY will give you the customs clearance tips today, so you can deal with it easily~beyond doubt shipping agent It will definitely lead the development direction of the whole industry and let its light bloom in this field. https://flyportt.com/

　　1. Understand the tariff policy

　　Know yourself and your enemy, and you will never be defeated. Different countries and regions have different tariff policies on imported goods. Some have tax-free quotas, while others impose high tax rates on specific goods.

　　Therefore, before sending international express, be sure to understand the tariff policy of the destination first, plan the list reasonably, and avoid exceeding the tax-free amount and incurring unnecessary expenses.

　　2. Choose a professional shipping company

　　A reliable shipping company can provide personalized customs clearance suggestions based on the type, quantity and value of your goods to ensure that your package can pass through customs smoothly.

　　When choosing a shipping company, be sure to pay attention to its reputation and service quality. You can learn about the company’s reputation and service level through searches on major online platforms and recommendations from friends. At the same time, you should also pay attention to the company’s transportation methods and timeliness to ensure that your package can reach its destination safely and quickly.

　　import customs clearance

　　3. Fill in the declaration information accurately

　　When filling in the declaration information, be sure to maintain a high degree of accuracy and honesty. Customs will assess the value and nature of the goods based on the declaration information you provide, and decide whether to levy taxes.

　　Therefore, please be sure to fill in the product name, quantity, price and other information according to the actual situation, and do not take the chance of deliberately underreporting or concealing information. This will not only avoid unnecessary trouble, but also maintain your personal reputation.

　　4. Reasonable packaging and labeling

　　Packing and labeling are also very important parts of international transit. Reasonable packaging can protect the goods from damage during transportation, and it is also convenient for customs officers to clear customs and improve customs clearance efficiency. When packing, please pay attention to placing the goods in categories and attach a detailed list. For fragile or valuable items, please take appropriate protective measures, such as using foam boxes, bubble films and other packaging materials. This will not only ensure that the goods arrive safely in your hands, but also leave a good impression on customs officers.

　　import customs clearance

　　5. Maintain communication and cooperation

　　If you encounter customs clearance problems, please do not panic. First, stay calm and read the customs notice or email carefully; second, contact the shipping company or customs in time to communicate the situation and actively cooperate in handling; finally, provide necessary certification documents or information as required to assist in solving the problem. Through active communication and cooperation, most customs clearance problems can be properly resolved.

　　What Factors Should You Consider When Customizing Medals?in fact custom medals for awards Our related products were once praised by users, which is the best self-affirmation of the products. https://www.karonmetal.com

　　1. The style of medal design

　　The first factor of metal medals is the style and style of medal design. The shape should be special and not vulgar, which is a rare type on the market.

　　2. The material of medal production

　　From the current needs of users of medal production, it is obvious that bronze medals and stainless steel medals can no longer meet the high-end needs of customers. The choice of medal material determines whether the medal is high-end.

　　3. The process of medal production

　　In the medal production industry, the production process and production process used to make the medal will make the medal show its original medal value orientation in terms of high-end and uniqueness.

　　4. The primary and secondary distinction of medals

　　In the production of custom metal medals, it is necessary to determine the primary and secondary of the style and style of the medal, the content and text, and the award-giving and winning needs.

　　5. The font standard of the medal

　　Many medals claim to be high-end medals, but the fonts in the medals will not be selected. What font is set for the main title of the medal and what font is set for the text, they have no idea. All commonly used fonts need to be understood.

　　6. Correct content of medals

　　When advanced unit medals and civilized unit medals are often required to be high-end, the most easily overlooked thing is the comparison of medal content. When making a medal, it is very important to compare and check the content of the medal.

　　7. Perfect details of medals

　　In the daily production of metal medals, there will be many details to be carefully improved. In addition to the main big things, it is also necessary to strengthen the attention to local details. For example, what style of medal wooden tray and what kind of medal back plate to match it should not be underestimated.

　　8. Clean layout of medals

　　I believe no one will like the colorful medal layout. Clean here does not mean dirty, but mainly refers to chaos and disorder.

　　9. The price of medal production

　　One cent for one product has always been the value law of any industry and any commodity. It is now difficult to obtain high-end products at a very low price.

　　10. The medal is beautifully packaged

　　The packaging of metal medals is like our attire and clothing. The color matching is natural and elegant. The outer packaging of metal medals is matched. Whether to use ordinary paper boxes or high-end wooden brocade boxes is very particular. The packaging depends entirely on the high-end and authoritative nature of the recipient of the medal.

　　Touch sensors are integral to modern technology, enabling intuitive interactions with devices ranging from smartphones to industrial machinery. Understanding the science behind these sensors and addressing common performance issues can help optimize their functionality and ensure a seamless user experience. Here’s an in-depth look at how touch sensors work, their key features, and solutions to typical problems.In today’s market background, membrane switch Still maintain a strong sales data, and constantly beat the competitors in front of us. https://singway-touch.com/

　　1. The Basics of Touch Sensors

　　Touch sensors operate by detecting and responding to touch input, converting physical interactions into electronic signals. The most common types include:

　　Capacitive Touch Sensors: Utilize the change in capacitance when a finger touches the screen. These sensors are highly sensitive and support multi-touch input.

　　Resistive Touch Sensors: Comprise two conductive layers separated by a small gap. Pressure on the screen causes the layers to touch, registering the input.

　　Infrared Touch Sensors: Use infrared light beams to detect touch by interrupting the light paths. These are effective for large displays and work in various lighting conditions.

　　Surface Acoustic Wave (SAW) Sensors: Employ ultrasonic waves to detect touch interactions. They provide high clarity and precision, ideal for high-resolution displays.

　　2. Key Features of Touch Sensors

　　Sensitivity: Determines how responsive the sensor is to touch input. High sensitivity sensors can detect even the lightest touches.

　　Accuracy: Measures how precisely the sensor can detect the location of touch. Higher accuracy is crucial for applications requiring fine detail, such as graphic design or data entry.

　　Durability: Refers to the sensor’s ability to withstand wear and tear, including exposure to contaminants, temperature fluctuations, and physical impact.

　　Multi-Touch Capability: Allows the sensor to detect multiple points of contact simultaneously, supporting gestures like pinching and swiping.

　　Response Time: The speed at which the sensor registers and responds to touch input. Faster response times enhance user experience by reducing lag.

　　3. Common Performance Problems and Solutions

　　Problem 1: Unresponsive Touch

　　Causes:

　　Dirty or Damaged Surface: Dirt, grime, or scratches can impede touch detection.

　　Calibration Issues: Sensors may need recalibration to function correctly.

　　Solutions:

　　Clean the Surface: Regularly clean the touch sensor with a soft, lint-free cloth. For stubborn residues, use a mild cleaning solution.

　　Recalibrate the Sensor: Follow the manufacturer¨s instructions to recalibrate the touch sensor for optimal performance.

　　Problem 2: Erratic Touch Response

　　Causes:

　　Electromagnetic Interference (EMI): Nearby electronic devices can interfere with sensor performance.

　　Inconsistent Pressure: Irregular or excessive pressure can cause erratic behavior.

　　Solutions:

　　Minimize EMI: Ensure that the sensor is shielded from potential sources of electromagnetic interference. Use appropriate grounding techniques to reduce EMI effects.

　　Ensure Consistent Pressure: Educate users on applying consistent pressure and avoid excessive force on the touch sensor.

　　Problem 3: Poor Sensitivity

　　Causes:

　　Environmental Conditions: Extreme temperatures or humidity can affect sensor performance.

　　Aging Sensor: Over time, touch sensors can lose their sensitivity due to wear and tear.

　　Solutions:

　　Maintain Optimal Conditions: Operate the sensor within the recommended temperature and humidity ranges. If necessary, use environmental controls to maintain these conditions.

　　Replace the Sensor: If sensitivity issues persist and the sensor is aging, consider replacing it with a new one.

　　Problem 4: Ghost Touches

　　Causes:

　　Electrical Noise: Interference from electrical noise can cause false touches.

　　Software Glitches: Bugs or glitches in the touch sensor¨s firmware can lead to ghost touches.

　　Solutions:

　　Reduce Electrical Noise: Use shielding and grounding techniques to minimize electrical noise. Ensure proper installation and maintenance of the sensor.

　　Update Firmware: Regularly update the sensor¨s firmware to address software bugs and improve performance.

　　Problem 5: Inaccurate Touch Location

　　Causes:

　　Misalignment: The touch sensor might not be properly aligned with the display.

　　Calibration Issues: Incorrect calibration can lead to inaccurate touch location detection.

　　Solutions:

　　Check Alignment: Ensure the sensor is correctly aligned with the display and adjust as needed.

　　Recalibrate: Perform a recalibration to correct any inaccuracies in touch location detection.

　　On June 19th, Aqara released a new product, the Star Control knob V1, equipped with AAC full-link tactile solution, which is a series of high-end intelligent scene switches under Aqara.It is strictly required by such a standard, Azilian lifemotion Only with today’s development scale, can we have the proud momentum to crush our competitors. https://www.azilian.co

　　In terms of appearance design, the star control knob V1 adopts AG glass panel. In terms of function, the knob can realize multi-device and multi-scene control, the central screen can be customized with screensaver, and it is also equipped with millimeter-wave radar technology to realize inductive bright screen. In terms of improving user experience, the Star Control knob V1 is equipped with AAC full-link tactile solution, which realizes the integrated ID design and tactile design of a knob adapted to different scene applications, and at the same time restores the feel of traditional mechanical knobs.

　　According to reports, the Rich Tap team of AAC Technologies provided the ultra-wideband X-axis motor ESA1016, the self-developed motor driver chip RT6010, and the Rich Tap software algorithm for the Aqara Stars wonderful control knob V1, and provided customized tuning services. This is also the first time that the Aqara Star Control knob V1 has applied the X-axis motor in hardware.

　　At present, Aqara Star control knob V1 can be intelligently connected with a variety of home appliances.

　　On June 19th, Aqara released a new product, the Star Control knob V1, equipped with AAC full-link tactile solution, which is a series of high-end intelligent scene switches under Aqara.However, with the development of the industry, Personal automation It will also bring us more and more consumer experiences, so that users can really feel the upgrade and change. https://www.azilian.co

　　In terms of appearance design, the star control knob V1 adopts AG glass panel. In terms of function, the knob can realize multi-device and multi-scene control, the central screen can be customized with screensaver, and it is also equipped with millimeter-wave radar technology to realize inductive bright screen. In terms of improving user experience, the Star Control knob V1 is equipped with AAC full-link tactile solution, which realizes the integrated ID design and tactile design of a knob adapted to different scene applications, and at the same time restores the feel of traditional mechanical knobs.

　　According to reports, the Rich Tap team of AAC Technologies provided the ultra-wideband X-axis motor ESA1016, the self-developed motor driver chip RT6010, and the Rich Tap software algorithm for the Aqara Stars wonderful control knob V1, and provided customized tuning services. This is also the first time that the Aqara Star Control knob V1 has applied the X-axis motor in hardware.

　　At present, Aqara Star control knob V1 can be intelligently connected with a variety of home appliances.