LinkX Cable is focused on accelerating data center and artificial intelligence computing systems that not only deliver high data transfer rates, but are also designed to specifically optimize low latency performance to meet the high speed and efficiency requirements of modern computing systems.At the same time, 400g qsfp-dd It is no longer a relatively unfamiliar industry, and it enters the public’s sight more and more frequently, gaining more attention and recognition. https://www.3coptics.com/

　　>. Main features and technical specifications

　　1. transmission distance and rate:

　　Data center applications: Support transmission distances up to 2 km, usually within 50 meters.

　　2. Data transmission rate:

　　800Gb/s Connected to the switch.

　　400Gb/s is connected to the network adapter and DPU (data processing unit).

　　linkx cable

　　>. Low latency and high bandwidth

　　Low latency: With 100G-PAM4 technology, LinkX cables can still maintain ultra-low latency when transferring large amounts of data, providing a solid guarantee for real-time analysis and decision making.

　　High bandwidth: Supports high bandwidth applications to meet the requirements of high-speed data transmission.

　　Low Bit Error Rate (BER) : Optimize design and testing to achieve the lowest bit error rate for low-latency, high-bandwidth applications.

　　Direct connection: Cross-fiber connects the two transceivers directly, reducing latency along the data transmission path. LinkX products can be seamlessly integrated into Nvidia Quantum InfiniBand and Spectral Ethernet network switches, ConnectX PCIe network adapters, and BlueField PCIe Dpus, creating an efficient and collaborative AI-accelerated ecosystem.

　　linkx cable

　　>. Unique advantages of artificial Intelligence AI-accelerated networks

　　In terms of accelerating AI computing, Nvidia’s networking technology shows significant advantages:

　　1. Focus on ultra-high data rates and low latency: The product focuses on a small number of components optimized for high data rates and low latency, unlike the complex configuration of hundreds of different components in the traditional IEEE Ethernet cable and transceiver product line.

　　2. Integrated design and testing: These components are not only designed and manufactured, but also rigorously tested to ensure that they operate optimally in an end-to-end configuration.

　　>. Selection of InfiniBand cable and optical module

　　When selecting an InfiniBand cable and optical module, you need to consider the buffer delay requirements of the switch, optical module performance, and optical fiber delay. This combined consideration helps minimize latency in high-speed systems, which is a key factor in AI-accelerated systems.

　　In today’s security landscape, motion detectors are essential for protecting both residential and commercial properties. Among these devices, Passive Infrared (PIR) detectors are especially popular due to their effectiveness in detecting movement. When it comes to choosing between wireless and wired outdoor PIR detectors, there are several factors to consider, including installation, maintenance, reliability, and cost. This article will delve into the key differences to help you make an informed decision.More importantly, put passive infrared sensor It is imperative for us to make thorough analysis and maximize its social function. https://www.sunlit-tech.com

　　1. Installation and Flexibility

　　Wireless Outdoor PIR Detectors:

　　Wireless motion sensors, such as the wireless motion sensor, offer significant advantages in terms of installation flexibility. These detectors don’t require extensive wiring, allowing them to be installed in various locations without the need for professional help. This makes them ideal for places where running wires is difficult, such as older buildings or outdoor areas. The ease of installation also means you can set up a comprehensive security system quickly and with minimal disruption.

　　Wired PIR Detectors:

　　On the other hand, wired PIR movement detectors require a more complex installation process. This involves running cables through walls, ceilings, or underground, which can be time-consuming and may require professional installation. However, once installed, wired detectors provide a stable and reliable connection that is not subject to wireless interference. This can be particularly beneficial in areas with a lot of electronic devices that might disrupt wireless signals.

　　2. Power Source and Maintenance

　　Wireless Outdoor PIR Detectors:

　　Wireless pir movement detector are typically battery-powered. While this allows for flexible placement, it also means that the batteries will need to be replaced periodically. Depending on the model and usage, battery life can range from several months to a few years. Some advanced wireless detectors come with features like power-saving modes and low-battery alerts to help manage this maintenance task.

　　Wired PIR Detectors:

　　In contrast, wired detectors draw power directly from the electrical system, eliminating the need for battery replacements. This ensures continuous operation without the risk of a detector going offline due to a dead battery. However, it does mean that the installation needs to include considerations for electrical wiring, which can add to the complexity and cost.

　　3. Connectivity and Reliability

　　Wireless Outdoor PIR Detectors:

　　One of the biggest advantages of wireless motion detectors is their ability to integrate with modern smart home systems. These detectors can connect to your home network, allowing you to monitor and control them remotely via your smartphone or other devices. They can send real-time alerts, enhancing your overall security. However, wireless signals can be susceptible to interference from other electronic devices, which might affect their reliability.

　　Wired PIR Detectors:

　　Wired PIR movement detectors are known for their reliability. Since they are hardwired, they are not affected by wireless interference, providing a stable connection to your security system. This makes them a good choice for environments with high levels of electronic noise. Additionally, wired detectors are less vulnerable to hacking compared to their wireless counterparts, offering an extra layer of security.

　　4. Security and Scalability

　　Wireless Outdoor PIR Detectors:

　　Wireless motion detectors are easily scalable. You can add more detectors to your system without the need for additional wiring, making it simple to expand your security coverage as needed. Their integration with smart home systems also means they can work in tandem with other security devices like cameras and alarms, providing a comprehensive security solution.

　　Wired PIR Detectors:

　　Scaling a wired system is more complex due to the need for additional wiring. However, for stable environments where the security setup is unlikely to change, wired systems offer robust and reliable protection. They are also less prone to interference and hacking, which can be crucial for high-security applications.

　　When deciding between wireless outdoor PIR detectors and wired models, consider your specific needs and circumstances. Wireless motion sensors offer flexibility, easy installation, and integration with modern smart home systems, making them ideal for dynamic and evolving security needs. Wired PIR movement detectors, however, provide unmatched reliability and stable performance, especially in environments with a lot of electronic interference. By weighing these factors, you can choose the PIR detector type that best suits your security requirements and provides peace of mind

More importantly, put pos machine factory It is imperative for us to make thorough analysis and maximize its social function. https://www.posodm.com

　　　　In the competitive world of POS hardware manufacturers, ensuring quality control is paramount for maintaining a strong reputation and customer trust. A POS machine factory employs several rigorous processes and standards to guarantee the reliability and performance of point of sale machines. Here’s a detailed look into how these factories ensure quality control:

　　1. Stringent Supplier Selection

　　POS hardware manufacturers begin by carefully selecting suppliers for components. Only suppliers who meet strict quality standards and provide high-grade materials are chosen. This initial step is crucial because the quality of the components directly affects the overall performance of the POS machines.

　　2. Incoming Material Inspection

　　Upon receiving components, a POS machine factory conducts thorough inspections to verify their quality. This includes checking for defects, ensuring they meet the specified requirements, and conducting random sampling tests. Any subpar materials are rejected to prevent compromising the quality of the final product.

　　3. Advanced Manufacturing Processes

　　Manufacturing processes in a POS machine factory are highly automated and utilize state-of-the-art technology. This ensures precision and consistency in the production of POS machines. Automation also reduces human error, which can lead to defects and inconsistencies.

　　point of sale all in one pos system.jpg

　　4. In-Process Quality Checks

　　Quality control doesn¨t end with the initial inspection; it continues throughout the manufacturing process. POS machine factories implement in-process quality checks at various stages of production. These checks include visual inspections, functional tests, and performance evaluations to identify and rectify any issues immediately.

　　5. Comprehensive Testing

　　Once the POS machines are assembled, they undergo comprehensive testing. This includes:

　　Functional Testing: Ensuring all features and functionalities work as intended.

　　Stress Testing: Subjecting the machines to extreme conditions to assess their durability and reliability.

　　Compatibility Testing: Verifying that the machines work seamlessly with various software and peripheral devices.

　　6. Quality Assurance Teams

　　A dedicated quality assurance (QA) team in a POS machine factory plays a critical role in maintaining high standards. This team comprises experts who continuously monitor production processes, conduct audits, and implement quality improvement initiatives. They also ensure compliance with industry standards and regulations.

　　pos hardware manufacturers.jpg

　　pos hardware manufacturer.jpg

　　7. Feedback and Continuous Improvement

　　POS hardware manufacturers actively seek feedback from customers and end-users. This feedback is invaluable for identifying areas of improvement. Factories analyze this data to make continuous enhancements to their products and processes, ensuring that the POS machines they produce remain top-tier.

　　8. Final Quality Inspection

　　Before shipment, each POS machine undergoes a final quality inspection. This is a thorough check to ensure that the product meets all quality standards and specifications. Only machines that pass this inspection are approved for distribution.

　　9. Certifications and Standards Compliance

　　Reputable POS machine factories adhere to international quality standards such as ISO 9001. These certifications demonstrate a commitment to quality management systems and continuous improvement. Compliance with these standards ensures that the factory maintains a high level of quality in its manufacturing processes.

　　The commitment to quality control in a POS machine factory is evident in every step of the production process, from supplier selection to final inspection. By implementing stringent quality checks and leveraging advanced technology, POS hardware manufacturers ensure that their point of sale machines are reliable, durable, and meet the highest industry standards. This meticulous attention to quality not only enhances the performance of POS machines but also reinforces the trust and satisfaction of customers worldwide.

　　As an environmentally friendly and sustainable new material, pulp molding has a wide range of applicability and great development potential. In the application of industrial packaging, cultural and creative, gifts, daily necessities, agriculture, medical and catering, it has shown obvious environmental advantages and sustainable development characteristics.By switching to pulp molding packaging, we can effectively reduce dependence on limited resources, reduce energy consumption and greenhouse gas emissions, reduce environmental pollution, and contribute to sustainable development. In today’s emphasis on low carbon and sustainable development, the production and use of pulp molding has further promoted the sustainable development of society. Here are 5 reasons to switch to pulp molding packaging.pass wet pressed molded pulp It can be seen from the present situation that the market prospect is relatively broad, which is conducive to our reference and investment. https://www.pulptray.com/

　　1. Pulp molding has a wide range of uses

　　Pulp molding is easy to use and can be cast into various shapes and sizes as needed. This makes pulp tray packaging very suitable for daily use, adding sophistication and extra protection to products. Packaging materials can even be customized to millimeter precision to make full use of available resources.

　　Pulp molded packaging suppliers

　　2. The degradable and environmentally friendly nature of pulp molding

　　The use of pulp mould can reduce carbon footprint and alleviate environmental degradation. Since pulp molding products come from natural fibers and materials, they can be 100% recycled. Most importantly, it has no harmful or toxic ingredients. Even if it is dumped in a landfill, natural fibers are biodegradable and compostable. By using natural raw materials, it can help reduce carbon emissions and reverse the damage caused by plastics and other non-biodegradable waste.

　　3. The popularity index of pulp molding has increased year by year

　　Since the issuance of the plastic restriction order, as people’s awareness of environmental protection has increased, it has become an important part of the green packaging field. And it has become a popular choice for corporate customers who value the concept of circular development.

　　4. Pulp molding is cost-effective

　　Compared with traditional packaging, pulp molding products have sufficient raw material sources, pollution-free production and use processes, a wide range of applications, low cost, light weight, high strength, good plasticity, cushioning, interchangeability and other properties, and can be reused and recycled. Therefore, it has a strong application prospect, so pulp molding products are more affordable and cost-effective than traditional packaging.

　　pulp tray packaging

　　pulp tray packaging factory

　　5. Pulp molding provides protective properties

　　Pulp molding packaging can soften vibrations, cushion, block, support and support anything you are shipping, and the additional protection is superior to traditional packaging materials.

　　For example, fresh fruit cushioning packaging, in addition to its cushioning performance protection, can also prevent contact collisions and friction scratches between fruits, and can also emit “stuffy heat” to absorb moisture molecules and suppress “ethylene concentration”, especially in midsummer or tropical areas. Since pulp molding trays do not block heat absorption, they can absorb evaporated moisture, thereby preventing fresh fruits from rotting and deteriorating, playing a role that other packaging cannot play.

　　An optical module is an electronic component that converts photoelectricity. Simply put, optical signals are converted into electrical signals, and electrical signals are converted into optical signals. It includes transmitting devices, receiving devices, and electronic functional circuits. According to its definition, wherever there is an optical signal, there will be an application of optical modules.Sufficient data show that 400g aoc cable It can drive many people to find jobs, thus driving economic development. https://www.3coptics.com/

　　optical modules

　　So what are the application devices and scopes of optical modules? Today we will show you in pictures and texts.

　　1. Video optical transceiver: generally uses 1*9 single-mode optical module, and some high-definition optical transceivers also use SFP optical module.

　　optical modules

　　2. Fiber optic transceiver: using 1*9 and SFP optical modules

　　3. Switch: The switch will use GBIC, 1*9, SFP, SFP+, XFP optical modules, etc.

　　4. Fiber optic router: generally using SFP optical modules

　　5. Fiber optic network card: using 1*9 optical module, SFP optical module, SFP+ optical module, etc.

　　6. Fiber optic high-speed ball camera: using SFP optical module

　　7. Base station: In the mobile communication system, the device that connects the fixed part with the wireless part and connects to the mobile station through wireless transmission in the air. Using SFP, XFP optical modules

　　8. Tunnel traffic monitoring

　　optical modules

　　Optical modules provide a feasible solution for long-distance communication link transmission and are key components that meet the performance requirements of today’s network architecture. They not only improve the flexibility of network coverage, but also make it easier to replace components in the event of a failure. 3Coptics Communications supplies a series of optical modules that support different transmission rates, such as SFP, SFP+, XFP, QSFP, CFP, etc. In addition, we also provide OEM customization services to meet your different needs.

　　In today’s security landscape, motion detectors are essential for protecting both residential and commercial properties. Among these devices, Passive Infrared (PIR) detectors are especially popular due to their effectiveness in detecting movement. When it comes to choosing between wireless and wired outdoor PIR detectors, there are several factors to consider, including installation, maintenance, reliability, and cost. This article will delve into the key differences to help you make an informed decision.pass wired PIR motion sensor As can be seen from its market performance, it has strong vitality and strong appeal. https://www.sunlit-tech.com

　　1. Installation and Flexibility

　　Wireless Outdoor PIR Detectors:

　　Wireless motion sensors, such as the wireless motion sensor, offer significant advantages in terms of installation flexibility. These detectors don’t require extensive wiring, allowing them to be installed in various locations without the need for professional help. This makes them ideal for places where running wires is difficult, such as older buildings or outdoor areas. The ease of installation also means you can set up a comprehensive security system quickly and with minimal disruption.

　　Wired PIR Detectors:

　　On the other hand, wired PIR movement detectors require a more complex installation process. This involves running cables through walls, ceilings, or underground, which can be time-consuming and may require professional installation. However, once installed, wired detectors provide a stable and reliable connection that is not subject to wireless interference. This can be particularly beneficial in areas with a lot of electronic devices that might disrupt wireless signals.

　　2. Power Source and Maintenance

　　Wireless Outdoor PIR Detectors:

　　Wireless pir movement detector are typically battery-powered. While this allows for flexible placement, it also means that the batteries will need to be replaced periodically. Depending on the model and usage, battery life can range from several months to a few years. Some advanced wireless detectors come with features like power-saving modes and low-battery alerts to help manage this maintenance task.

　　Wired PIR Detectors:

　　In contrast, wired detectors draw power directly from the electrical system, eliminating the need for battery replacements. This ensures continuous operation without the risk of a detector going offline due to a dead battery. However, it does mean that the installation needs to include considerations for electrical wiring, which can add to the complexity and cost.

　　3. Connectivity and Reliability

　　Wireless Outdoor PIR Detectors:

　　One of the biggest advantages of wireless motion detectors is their ability to integrate with modern smart home systems. These detectors can connect to your home network, allowing you to monitor and control them remotely via your smartphone or other devices. They can send real-time alerts, enhancing your overall security. However, wireless signals can be susceptible to interference from other electronic devices, which might affect their reliability.

　　Wired PIR Detectors:

　　Wired PIR movement detectors are known for their reliability. Since they are hardwired, they are not affected by wireless interference, providing a stable connection to your security system. This makes them a good choice for environments with high levels of electronic noise. Additionally, wired detectors are less vulnerable to hacking compared to their wireless counterparts, offering an extra layer of security.

　　4. Security and Scalability

　　Wireless Outdoor PIR Detectors:

　　Wireless motion detectors are easily scalable. You can add more detectors to your system without the need for additional wiring, making it simple to expand your security coverage as needed. Their integration with smart home systems also means they can work in tandem with other security devices like cameras and alarms, providing a comprehensive security solution.

　　Wired PIR Detectors:

　　Scaling a wired system is more complex due to the need for additional wiring. However, for stable environments where the security setup is unlikely to change, wired systems offer robust and reliable protection. They are also less prone to interference and hacking, which can be crucial for high-security applications.

　　When deciding between wireless outdoor PIR detectors and wired models, consider your specific needs and circumstances. Wireless motion sensors offer flexibility, easy installation, and integration with modern smart home systems, making them ideal for dynamic and evolving security needs. Wired PIR movement detectors, however, provide unmatched reliability and stable performance, especially in environments with a lot of electronic interference. By weighing these factors, you can choose the PIR detector type that best suits your security requirements and provides peace of mind

　　In today¨s world, where sustainability and efficiency are more important than ever, compact solar power generators are becoming increasingly popular. These portable, eco-friendly devices offer a reliable solution for powering various electronic devices, making them an ideal choice for outdoor enthusiasts, emergency preparedness, and those looking to reduce their carbon footprint.pass packsico portable solar panel It can be seen from the present situation that the market prospect is relatively broad, which is conducive to our reference and investment. https://www.packsico.com/

　　Benefits of Compact Solar Power Generators

　　1.Eco-Friendly Energy: Solar power generators harness energy from the sun, a renewable resource, reducing reliance on fossil fuels. This significantly lowers carbon emissions and minimizes environmental impact.

　　2.Portability and Convenience: Compact solar generators are designed for easy transport. Their lightweight and portable design make them perfect for camping trips, outdoor events, and remote locations where traditional power sources are unavailable.

　　3.Cost-Effective: While the initial investment in a solar power generator may be higher than conventional generators, the long-term savings are substantial. Solar energy is free, and the maintenance costs of solar generators are minimal compared to fuel-powered generators.

　　4.Quiet Operation: Unlike traditional generators, which can be noisy and disruptive, solar power generators operate silently. This makes them ideal for use in noise-sensitive environments such as campsites and residential areas.

　　compact solar power generator

　　Key Features to Consider

　　When choosing a compact solar power generator, there are several important features to consider:

　　1.Battery Capacity: The battery capacity determines how long the generator can provide power. Look for a generator with a battery capacity that suits your needs, whether it¨s for short camping trips or extended power outages.

　　2.Port Options: Ensure the generator has multiple ports, including USB, AC, and DC outlets, to charge a variety of devices simultaneously. This versatility is crucial for maximizing the utility of the generator.

　　3.Solar Panel Efficiency: The efficiency of the solar panels directly affects the charging time of the generator. High-efficiency panels will charge the battery faster, ensuring a continuous power supply.

　　4.Durability: Since these generators are often used in outdoor and rugged environments, durability is key. Look for models with robust construction and weather-resistant features to ensure longevity and reliability.

　　compact solar power generator

　　Popular Uses

　　Compact solar power generators have a wide range of applications:

　　1.Outdoor Activities: Ideal for camping, hiking, and fishing trips, these generators provide a reliable power source for lighting, cooking appliances, and electronic devices.

　　2.Emergency Preparedness: In the event of natural disasters or power outages, solar generators offer a dependable backup power source for essential devices such as medical equipment, communication devices, and refrigerators.

　　3.Remote Work: For those who work remotely or travel frequently, compact solar power generators provide the necessary power to keep laptops, phones, and other electronic devices charged and operational.

　　4.Off-Grid Living: Individuals and families living off the grid can benefit from the sustainable and independent power supply provided by solar generators, reducing their reliance on traditional power grids.

　　Conclusion

　　Compact solar power generators are an efficient, eco-friendly, and versatile solution for a variety of power needs. By harnessing the power of the sun, these generators offer a sustainable alternative to traditional energy sources, helping to reduce carbon footprints and promote a greener future. Whether for outdoor adventures, emergency situations, or off-grid living, investing in a high-quality compact solar power generator is a smart and responsible choice.

It is strictly required by such a standard, all in one pos Only with today’s development scale, can we have the proud momentum to crush our competitors. https://www.posodm.com

　　When it comes to selecting a cash register for your business, one of the key components to consider is the quality of the cash register screen. The screen is the primary interface between the cashier and the system, and its quality can significantly impact the efficiency and accuracy of transactions. In this article, we will discuss how one can determine the quality of a cash register screen.

　　1. First, we need to pay attention to the resolution of the display.

　　The higher the resolution, the clearer the displayed image, and the easier it is to recognize the fonts and details. Therefore, when purchasing a cash register display, we need to choose the parameter configuration of the display resolution according to actual needs. A cash register with a higher resolution display can allow customers and cashiers to see transaction information in high definition in a busy commercial environment.

　　2. Secondly, we need to examine the brightness and contrast of the display.

　　Brightness refers to the luminous intensity of the cash register display, while contrast reflects the difference between the brightest and darkest parts of the image. In a dimly lit environment, a display with higher brightness can better present transaction information; in a brighter environment, a display with higher contrast can better restore the color of the image. Therefore, we need to choose a cash register screen with appropriate brightness and contrast according to the environment where the cash register is located.

　　cash register screen.jpg

　　3. In addition, we also need to pay attention to the durability and stability of the display.

　　Cash register screen in commercial environments need to run for a long time, so the display must have high durability and be able to withstand frequent use and various harsh conditions. At the same time, the stability of the cash register screen is also very important. It needs to ensure that there will be no flickering, color distortion and other problems during long-term use.

　　Nowadays, many cash registers use multi-point capacitive touch screens. You can operate the various application functions of the cash register by touching the screen with your fingers. Whether the touch response of the capacitive touch display is fast and agile is also the key to test the quality of a cash register display. Now, better touch screen cash registers generally use more than 10-point capacitive touch screens, which can give merchants and customers a better operating experience.

　　all in one point of sale systems.jpg

　　Finally, we can understand the actual performance of the display by looking at the user reviews and professional reviews of the product. User reviews can reflect the actual use effect of the product, while professional reviews can provide more detailed technical parameters and performance evaluations. This information will help us understand the quality of the cash register display more comprehensively, so as to make a more informed purchase decision.

　　In summary, to distinguish the quality of the cash register display, we need to pay attention to the resolution, brightness, contrast, durability, responsiveness and stability of the display. By comprehensively considering these factors, we will be able to correctly identify the display configuration of a high-quality cash register, and provide strong support for more cost-effective purchase of the whole machine.

　　In our daily lives, we often use a variety of packaging materials. However, with the improvement of environmental awareness, we need to consider how to choose more sustainable packaging methods. As an emerging green and environmentally friendly product, pulp molded packaging is widely used in the fields of medical, agriculture, electronic products, and catering food. At the same time, against the backdrop of soaring prices of packaging paper and mature 3D mold printing technology, pulp molded packaging has emerged in the field of design. Converting plastic packaging to pulp molded packaging can not only reduce plastic pollution, but also help us develop new sustainable habits.It is strictly required by such a standard, molded pulp packaging Only with today’s development scale, can we have the proud momentum to crush our competitors. https://www.pulptray.com/

　　Wet press molded pulp supplier

　　1. Environmental advantages of pulp molding

　　Pulp molding raw materials use plant fibers such as sugarcane bagasse and bamboo residue, which have the ability to be renewable in a short period of time. In addition to its own environmental protection, it does not require the felling of a tree. No chemicals are added during the pulping process. It is just water, recycled corrugated paper, waste paper scraps or newsprint. During the manufacturing process, it is a very friendly process for the protection of the earth’s environment, and no toxic or harmful materials are introduced or discharged into the environment. At the same time, the amount of raw materials used is much lower than that of traditional gift boxes such as handmade boxes, and the carbon emissions are lower. By comparison, it is found that for gift boxes of the same size, the amount of raw materials used in pulp molding is only half of that of traditional gift boxes.Moreover, when the packaging is recycled, all waste is returned to the pulp to achieve zero manufacturing waste. The final packaging is also 100% recyclable. Under normal circumstances, pulp molded products discarded in the open air within three months can be completely degraded and composted under natural conditions. No secondary pollution or industrial waste will be generated. Protect the environment and eliminate white pollution!

　　wet pressed cosmetic molded pulp trays

　　Moulded pulp sugarcane

　　2 . Brand advantages of pulp molding

　　From the form of the product, pulp molding gives more choices for packaging appearance. Traditional packaging cannot or is difficult to achieve various special-shaped boxes. The differentiated appearance has high-end attributes. This is also one of the important reasons why most international brands are willing to use molded pulp packaging. Because the packaging of the product can often reflect some of the attributes of the product itself. A packaging appearance that fits the product makes it easier for consumers to accept and understand the product performance. At the same time, pulp molding packaging can give the brand differentiated characteristics from the touch! The environmentally friendly characteristics also make him more popular.

　　Moreover, molded pulp packaging can be made into special-shaped boxes due to its characteristics. Not only that, the outer packaging process selection is more diverse, including hot stamping, UV, high-definition, envelopes, embossing, etc., giving your designers unlimited possibilities. At the same time, compared with the complicated and cumbersome production process of traditional packaging, pulp molding products are molded in one piece and fully automatic production is achieved by machines, which can save labor costs to the greatest extent and improve production efficiency. In the future, the cost of pulp molding packaging will be much lower than traditional packaging!

　　Pulp molding packaging stands out as a leader in environmental protection, offering a range of benefits that align with the growing emphasis on sustainability. By utilizing 100% recycled materials, reducing carbon emissions, and providing versatile and durable packaging solutions, pulp molding is paving the way for a greener future. For businesses committed to reducing their environmental impact while maintaining high standards of performance, pulp molding packaging is an exceptional choice.

　　With the rapid development of information technology and the increasing demand for data transmission, optical communication technology plays a vital role in modern networks. DWDM technology greatly increases the data transmission capacity by using multiple optical signals of different wavelengths to transmit simultaneously on one optical fiber. The tunable optical module can switch between multiple wavelengths to achieve flexible and efficient wavelength management. The 25G Tunable DWDM tunable optical module combines these two technologies to provide higher data rates and greater adaptability.So, I believe 400g qsfp-dd In the future, it will be promising to create a miracle belonging to the industry. https://www.3coptics.com/

　　5g fronthaul

　　ETU-LINK 25G Tunable DWDM 15km optical module adopts advanced 25G tunable optical chip, combined with the self-made tunable TOSA and self-made APD/PIN chip solution of internal separation solution, which ensures the module to achieve stable transmission of 25G 15km on single-mode optical fiber. In addition, the module supports 96-channel transmission and can complete automatic wavelength adjustment in a short time, greatly improving the efficiency of network operation and maintenance.

　　Product features:

　　High-speed transmission: The module supports 25.78Gbps high-speed data transmission, covers a single-mode optical fiber distance of 15KM, and the transmission optical power range is between 0~5dBm, ensuring good transmission eye diagram performance.

　　5g fronthaul

　　Flexible wavelength management: 96 channels are adjustable. When the optical power and eye diagram change, the wavelength adjustment is automatically completed within 3-5 seconds to ensure the correct wavelength and simplify network operation and maintenance.

　　5g fronthaul

　　Low power consumption design: The power consumption is less than 2W in commercial mode and less than 2.5W in industrial mode, meeting energy-saving standards.

　　3.jpg

　　Environmental adaptability: Commercial temperature range 0≧ to 70≧, industrial temperature range -40≧ to 85≧, meeting diverse environmental needs.